Sony XE300 Bluetooth Pairing

Right front view of the Sony SRS XE300 speaker.

This post provides Bluetooth pairing directions for the Sony XE300 wireless column speaker, to common portable devices. E.g. These include the Apple line of devices, like the iPhone, iPod Touch, and iPad. This routine also works for Android base devices as well, such as Samsung and LG phones, as well as Amazon Fire tablets.

Sony XE300 Bluetooth Pairing, Step by Step

With your SRS XE300 powered OFF (power button is dark), run through this procedure to pair it to your source BT mobile device. We’re using an iPad Air computer for this demo.

1. Go to the Home Screen on your Source Device

Firstly, press the Home button to reveal the smart device’s Home screen.

2. Find the Settings App

We found ours on the second page of the Home screen, as shown next.

iOS Home Screen with Settings App Highlighted

3. Bring up the Settings App

Thirdly, touch the Settings app icon.

The smart device then shows the first page of its settings, as shown in the next step.

4. Go to the Bluetooth Settings Page to Continue with Sony XE300 Bluetooth Pairing

Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is enabled here. But since our Sony XE300 is currently shut OFF (is not in discovery mode), it does not show up in the BT devices list. Also, we don’t see it since we’ve never paired this speaker with this particular mobile test device before.

iPadOS -Bluetooth Settings- page showing nothing discovered

5. Turn On the XE300

Turn on the 300 by quickly pressing its Power button. See this, pointed at by the green arrow in the next picture.

The Power button on the Sony XE300.

The unit then powers up, and its Power / Status light glows steady green, as we in the next picture.

The green glowing Power Lamp on the Sony XE300.

But since our tablet does not know about this speaker, the SRS XE300 will not pair with it automatically.

6. Put the XE300 in Discovery Mode

Now, to see the speaker on your device, place it into discovery / pairing mode. So to accomplish that, press and release the Pairing button. You should then hear the rising pitch beep sequence and the speaker also announces, “Bluetooth pairing,” in a lady’s voice.

The Pairing button on the Sony XE300.

Find the Pairing button in the buttons panel, second one down from the top, just below the Power button.

In addition to the voice announcement, the Bluetooth Status lamp begins flashing blue in the pulse-pulse-pause-pulse-pulse-pause pattern, as we see next.

The blue blinking Bluetooth Pairing light.

7. Find the Speaker on your Mobile Device to Continue with Sony XE300 Bluetooth Pairing

See the screen shot next. We found our XE300, as pointed at by the green arrow.

The Sony XE300 showing as discovered.

8. Now Pair with the XE300

Tap the listed speaker in the discovered devices list.

Your source device then pairs with the BT speaker.

E.g. The the mobile device’s Bluetooth Settings screen might then change to look something like the following. Note the now-connected SRS XE300 entry, as pointed at by the green arrows in the next screenshot.

The speaker showing as Connected.