Picture of the left front of the Sony SRS XE300 speaker.

Sony XE300 Watts Output

The SRS XE300 Sony Bluetooth speaker is a medium power, tabletop style column system with enough watts output to fill a run-of-the-mill living room with big sounding tunes.

But what does the number of watts a wireless speaker has, tell us about how good it is?  Firstly, the watt is a measure of how much power the speaker consumes or outputs.  Plus, this metric is a convenient comparison measure. E.g. Generally speaking, speakers with more watts of audio output tend to play louder than those with less.  And while they do cost more, have bigger, heavier batteries and chargers, along with larger drivers and magnets, they nonetheless offer greater dynamic range, have a deeper bass response, and the models that do stereo offer typically a bigger soundstage and better imaging to listeners.

Picture of an Echo Dot 4 clock speaker beside the Sony XE300.
An Echo Dot 4 clock speaker beside the Sony XE300.

Thus in general, the more powerful the speaker, the better it sounds, even at lower volume. You get improved crispness due to higher accuracy reproduction of the bass, midrange, and treble musical content. More reserve power often means less clipping artifacts too. So, the speaker’s max watts output is a primary indicator of speaker quality and performance.  And as such, this value is of great interest to audiophiles and novice listeners alike.

In this case, the Sony XE300, as a common sized portable Bluetooth speaker, is a decently loud model for all the bigger it is. Its watts can fill a room with clean sounding music. See below for details on its power output.





Sony XE300 Watts Output: Details

    1. Battery Capacity: 19.98 watt-hours (7.4 volts, 2.7 amp-hours).
    2. AC Charger Power: 7.5 watts (5 volts at 1.5 amps).
    3. Bluetooth Standby Mode Power: Less than 0.3 watts.
    4. Total Audio Output Power on AC (RMS): 10 watts.
    5. Total Peak Audio Power (both channels): 14.14 watts.
    6. Output Power per Channel: 5 watts RMS.
    7. Audio Output Power on Battery: Decreases as battery approaches depletion.

Sony XE300 Watts Output: Other Notes

    1. The system tries to conserve battery power as the battery get close to total depletion.  The XE 300 does this by reducing the audio output power somewhat.
    2. This speaker may not get enough enough power from the AC adapter to keep the battery from discharging when playing at full volume, depending on what you’re listening to.  So it’s possible that even with the unit plugged in, you could still see it shut OFF unexpectedly.  Thus on the (rare) occasions that this occurs, just stop playing the 300 for an hour or two, to let it build up some reserve power while charging. Then, fire it up again for continued party fun.

Related Posts to Sony XE300 Watts Output

    1. Sony SRS XP 500 Watts Output
    2. Sony X11 Watts Output
    3. Sony XB40 Watts Output
    4. Sony SRS XG300 Watts Output
    5. Sony SRS XB10 Watts Output

Other Sony XE300 Posts

    1. Sony XE300 Reset Procedure
    2. How to Pair Sony XE300
    3. Sony XE300 Orange Light Stays On
    4. How to Connect Sony XE300 to Alexa
    5. Sony XE300 Buttons

References

    1. Official Sony XE300 Support Page
    2. Where to Buy the Sony XE300

Revision History

    • 2023-04-02: First published.