You charge the Sony XG500 via the barrel style DC power input port, and to get the quickest charge time and fullest recharge, use the charger that comes with the speaker, or an equivalent. Details follow.
According to the specs, the time it takes to charge the SRS XG500 Bluetooth speaker is three (3.0) hours, using the 20 volt, 4 amp, 80 watt charger that Sony supplies with this speaker, or equivalent.
On a complete charge, the speaker can play for up to thirty (30) hours. Why? Because of its built in lithium ion battery. But when you play it loudly, especially with booming bass, you will indeed see much shorter playing times per charge cycle.
We see this Bluetooth speaker die in around ten hours when we play at louder volume. So to get the longest playing time per recharge, power saving is useful. Just play it only as loudly as you need to, to hear it well throughout your listening space.
If you own this speaker over a few years, you may notice that the time it plays from a single charge shrinks as the speaker gets older. This is normal for devices like this one, that rely on lithium ion batteries.
But by deep cycling the battery now and then, you can slow this charge capacity decrease. So to exercise the XG500, run the battery all the way dead, and then recharge it again every three to six months.
Finally, we advise that you avoid leaving the speaker connected to a charger once it reaches full charge. So right after the charging lamp goes out, unplug the speaker as soon as you can, to avoid overcharging it and aging the battery early.
Covers the JBL Go 3 Firmware Update Instructions. However, we know of no way to…
We show you here How to Factory Reset JBL Go 3 BT Speaker, to restore…
This post gives the procedure to Connect JBL Go 3 to Alexa. Since this pairing…
When the JBL Go 3 Speaker Won't Turn ON, this likely means one or more…
Explains How to Put JBL Go 3 Speaker in Pairing Mode. So first, turn on…
When the JBL Go 3 Won't Turn ON, this likely means one or more things…