Tag: In
-
CBS COM Streaming Videos Fail to Play in Internet Explorer
Covers ways of solving when CBS.COM Streaming Videos Fail to Play in Internet Explorer below. The Problem: CBS.COM Streaming Videos Fail to Play in Internet Explorer CBS streaming video on the CBS web site fails to play in Internet Explorer 11. E.g. Clicking on an episode, instead of playing it, invites you to install Flash…
-
Philips SHQ1000-28 Waterproof In Ear Sports Headphones Review
Our Philips SHQ1000-28 Waterproof In Ear Sports Headphones Review follows. In short, these earbuds are not high fidelity. But they are very durable, sweat proof, waterproof. Just be sure to use the rubber cups they come with. These buds are well-fitting for sports, comfortable, and not bad sounding. Clearly though, they focused more on the…
-
How to Put Sony SRS XB32 in Pairing Mode
Explains here How to Put Sony SRS XB32 in Pairing Mode. You need to know how to do this to pair it with common smart devices, and play audio from them on it. E.g. These include the Apple and Android phones, media players, and tablets. How to Put Sony SRS XB32 in Pairing Mode: Step…
-
How to Put JBL Speaker in Low Frequency Mode
How to Put JBL Speaker in Low Frequency Mode? Unfortunately, turning ON and OFF this mode does not work. Hopefully, JBL will add this feature back on in a later version of the firmware. But if this did work, it might function as follows, just as it has on other JBL Flip speakers. Now when…
-
JBL Speaker Water in Charging Port
Covers why you might hear a strange sound during charging this Flip. You could have JBL Speaker Water in Charging Port. This sound could occur due to a wet or defective charging port. So be sure the port is dry and free of debris before following this procedure to charge the Flip. You may have…
-
JBL Speaker Flashing White Light When Plugged In
The JBL Speaker Flashing White Light When Plugged In. This is normal, and usually displays battery status as it charges. Whether it’s draining or charging. So it displays charging progress. Or it shows how full the battery is at a given time. It also tells you how much “juice” the battery has left as the…
-
How to Put JBL Go 1 in Pairing Mode
To link the JBL Go 1 with a Bluetooth source device, you must know how to activate pairing mode. Why? Because in this mode, the JBL Go 1 broadcasts its Bluetooth name and current linkage details. Then this allows nearby devices to use that information to connect with it. So we show here How to…
-
How to Put Sony SRS XB43 in Pairing Mode
This post explains How to Put Sony SRS XB43 in Pairing Mode, to connect it with common Bluetooth devices. E.g. These include the iPhone, iPod Touch, and the iPad line of Apple phones, media players, and tablets. How to Put Sony SRS XB43 in Pairing Mode: Step by Step With your SRS XB43 speaker shut…
-
How to Put JBL Xtreme 2 in Pairing Mode
Explains How to Put JBL Xtreme 2 in Pairing Mode here. Now to pair this speaker with a wireless source device for the first time, or to refurbish the connection information stored on that device, you must know how to begin pairing mode on the speaker. Moreover, in this mode, the Xtreme 2 advertises its…
-
How to Put JBL Boombox 2 in Pairing Mode
Shows How to Put JBL Boombox 2 in Pairing Mode. Doing this first lets you join it to phones, tablets, computers, and smart speakers. In this mode, the speaker broadcasts its Bluetooth name and current linkage data. Finally, it does this to allow other Bluetooth devices to find and connect to it. So the details…