Tag: JBL Wonderboom I
-
JBL Wonderboom 1 Charge Time
You charge the JBL Wonderboom 1 via the covered micro USB charge port. And to get the quickest JBL Wonderboom 1 charge time and fullest charge when the speaker runs low on power, be sure to use a medium to high current USB charger. Also, exercise the battery, and do not leave the speaker on…
-
Make JBL Wonderboom 1 Discoverable
To pair the JBL Wonderboom 1 with a BT source device for the first time, or to refresh the connection information stored on that device, you must know how to launch discovery mode on this unit. Further, in this mode, the JBL Wonderboom 1 sends its Bluetooth name and current linkage info on the BT…
-
How to Run Battery Check on JBL Wonderboom 1
Describes How to Run Battery Check On JBL Wonderboom 1, and also, how to know if the battery life is shortening over time. How to Run Battery Check on JBL Wonderboom 1: Step by Step 1. First, Turn ON the JBL Wonderboom 1 You won’t be able to read battery charge status unless the speaker…
-
JBL Wonderboom 1 Battery Not Charging
Most Bluetooth speakers, including the JBL Wonderboom 1, offer truly portable operation via their lithium ion batteries inside. And when said battery dies, you can recharge the speaker with an AC or car adapter. Sometimes though, you may notice the JBL Wonderboom 1 battery not charging fully, or at all, even when you connect the…
-
JBL Wonderboom 1 Firmware Upgrade
Covers the JBL Wonderboom 1 firmware upgrade details. Or lack thereof. Indeed we know of no way to upgrade the software on this speaker. Also, we find that currently, there are no firmware downloads listed for it on the Ultimate Ears web site. Additionally, neither do they supply any details for how to do this…
-
JBL Wonderboom 1 How to Put In Pairing Mode
To link the JBL Wonderboom 1 with a Bluetooth source device for the first time, or to reset the connection information on that device, you must know how to put it in this mode. This makes the JBL Wonderboom 1 call out its Bluetooth name and current linkage data on the BT airwaves. So in…
-
JBL Wonderboom 1 Bluetooth Pairing Mode
To link the JBL Wonderboom 1 with a Bluetooth source device for the first time, or to reset the connection information on that device, you must know about the JBL Wonderboom 1 Bluetooth pairing mode. You need this skill because in this mode, this speaker calls out its Bluetooth name and current linkage data on…
-
Connect JBL Wonderboom 1 to iPad
This post gives the Connect JBL Wonderboom 1 to iPad directions. So first, start with this speaker OFF (all dark LEDs). Then, follow along to pair it with most any source device. So in this demo, we show how pairing works on our iPad Air mobile computer. But like procedures work for iPhones, iPods, and…