Tag: The JBL Go
-
Charge JBL Go
This piece covers how to charge the JBL Go 2. Do this simply through the USB power in port, behind the water resistant door. Here, we detail this charging procedure for these tiny beach ready waterproof speakers. Note that you can still play your Go 2 as it charges. First, pick a strong enough USB…
-
JBL Go Blinking Red Light
Many JBL speakers, including the Go 1 very small model, have a blinking red light on the front grill, near the top, when the battery is almost out of power. Sometimes though, this red LED lamp flashes for long periods as you play the Go. E.g. It begins pulsating during play and does not stop,…
-
JBL Go Watts
The JBL Go by Harman Kardon is a low power, hand-held tiny unit with still enough watts to fill a small area around a table with decent sounding tunes. But what do the watts a little wireless speaker has, tell us about how good it is? Firstly, the watt is a quantity of how much…
-
JBL Go Reset Button
Here, we show where to find the JBL Go Reset Button. Press a button duo to reset JBL Go and Go 2 models. Yet unlike some other popular Bluetooth speakers, we find no single button on this one labeled as Reset. Thus to reset the Go speaker line, you use a button combination. For details…
-
JBL Go Red Light Stays ON
Many JBL speakers, including the Go 1, sport a status light that blinks red when the battery is low, and continuously shines red while charging / recharging . Sometimes though, this light stays on. E.g. It does not turn off once charging is done, and this is concerning for many JBL Go owners. So in…
-
Pair JBL Go 3
This post shows how to pair a JBL Go 3 personal wireless speaker with common mobile devices such as the iPhone, iPad, and iPod mobile devices. Pair JBL Go 3: Step by Step With your Go 3 powered OFF (status lamp is dark), run through this routine to pair it to your mobile device. 1.…
-
How to Pair JBL Go 3
This post shows how to pair a JBL Go 3 personal wireless speaker with common mobile devices such as the iPhone, iPad, and iPod mobile devices. How to Pair JBL Go 3: Step by Step With your Go 3 powered OFF (status lamp is dark), run through this routine to pair it to your mobile…
-
Finding JBL Go 3 Firmware Version
Here, we give finding JBL Go 3 speaker firmware version instructions. This is the version that this speaker is currently running. Knowing this number helps JBL support personnel when fixing speaker problems. This can aid them in troubleshooting issues, bad behaviors, button lockups, pairing failures, and other issues. Note that in the JBL Go 3,…
-
How to Turn ON JBL Go 3
We explain how to turn on the JBL Go 3 speaker here. Now most speakers have a Power button that they prominently position on the unit so it’s easy to find. Indeed, this speaker is no exception to this rule, since we find its Power button on the side button panel, as we see next.…
-
JBL Go 3 Volume Control
There are a few ways for how to set the volume control on the JBL Go 3 Bluetooth speaker. Furthermore, these depend on the app(s) you’re playing from mostly. Many apps provide volume controls. Plus, this JBL speaker has two buttons for volume control. Find these (the + and -) buttons across its top. Note…