Bluetooth Speakers

UE Wonderboom 1 Check Battery Level

Covers the UE Wonderboom 1 check battery level procedure, and also, how to know if the battery is degrading over time.

UE Wonderboom 1 Check Battery Level: Step by Step

1. First, Turn ON the UE Wonderboom 1

You won’t be able to read battery charge status unless the speaker is ON.

The UE Wonderboom 1 top view. Showing the dark -Power- button.

To turn on the speaker, press and release the Power button, circled in the last picture.

The little lamp in that button should then come on, as shown next, and the speaker should make its startup sound.  If it does not, then the battery could be completely dead.

The UE Wonderboom 1 powered ON. Showing the glowing -Power- button. Gives some indication of battery level.

But as long as there’s some juice in the battery, the speaker should power up.  When it does, move on to the next step.

2. Press and Release the Volume UP and Volume DOWN Buttons to Hear the UE Wonderboom 1 Battery Level

Press and release the center areas of the Volume UP and Volume DOWN buttons at the same time.  Find these areas in the picture shown next.

The -Volume UP(+)- and -Volume DOWN (-)- buttons.

When you press these buttons together, the speaker makes one to four “blunk” sounds to tell you how high the battery level is.  Four blunks means that the battery has between 75 and 100 percent charge.  Three blunks, and the battery has between 50 and 75 percent charge.  Two blunks denotes that you have between 25 and 50 percent charge in the speaker’s battery.  And finally, one blunk means between 0 and 25 percent charge.

Also, when the UE Wonderboom 1 battery level gets critically low, the Power lamp starts flashing red.

Press these buttons any time the speaker is ON, to check the battery level.  The number of blunks you hear, lets you roughly guess how much time you have left to play the speaker, before it goes dead.  Since a fully charged UE Wonderboom 1 plays for roughly ten hours.  So four blunks means that the speaker has between 7.5 and 10 hours of play time left before it goes dead.  Three blunks means that it will play for another 5 to 7.5 hours.  Two blunks means between 2.5 and 5 hours of music time left.  And 1 blunk means that you’ll get between 0 and 2.5 more hours of play time.

Other UE Wonderboom 1 Posts

    1. Charge Time to Expect
    2. Factory Reset Procedure
    3. Charging Instructions

References for UE Wonderboom 1 Check Battery Level

    1. Official UE Wonderboom 1 Support Page
    2. Where to Buy the UE Wonderboom 1
admin

Recent Posts

Fix DVD Skips and Freezes

We have nearly three decades experience playing and caring for digital video discs (DVDs). Indeed,…

4 hours ago

Telling That JBL Charge 3 is Charging

Lists ways of Telling That JBL Charge 3 is Charging. Now this BT speaker with…

4 hours ago

Reboot Samsung Galaxy J7

In this piece, we cover the Reboot Samsung Galaxy J7 procedure. You might do this…

4 hours ago

JBL Xtreme 2 Firmware Update

Here, we offer JBL Xtreme 2 firmware update procedure for this revised version of the…

6 hours ago

Echo Dot 2 Buttons

The Echo Dot 2 features several buttons and a light ring around its top, and…

6 hours ago

Sony SRS XG300 Power Button Not Working Fix

Here are some fix ideas for when you find the Sony SRS XG300 Power Button…

6 hours ago