Bluetooth Speakers

UE Wonderboom 1 Check Battery

Covers the UE Wonderboom 1 check battery procedure, and also, how to know if the battery is degrading over time.

UE Wonderboom 1 Check Battery: Step by Step

1. First, Turn ON the UE Wonderboom 1

You won’t be able to read battery charge status unless the speaker is ON.

The UE Wonderboom 1 top view. Showing the dark -Power- button.

To turn on the speaker, press and release the Power button, circled in the last picture.

The little lamp in that button should then come on, as shown next, and the speaker should make its startup sound.  If it does not, then the battery could be completely dead.

The UE Wonderboom 1 powered ON. Showing the glowing -Power- button. Gives some indication of battery charge present.

But as long as there’s some juice in the battery, the speaker should power up.  When it does, move on to the next step.

2. Press and Release the Volume UP and Volume DOWN Buttons to Hear the Level Sounds

Press and release the center areas of the Volume UP and Volume DOWN buttons at the same time.  Find these areas in the picture shown next.

The -Volume UP(+)- and -Volume DOWN (-)- buttons.

When you press these buttons together, the speaker makes one to four “blunk” sounds to tell you how high the battery is.  Four blunks means that the battery has between 75 and 100 percent charge.  Three blunks, and the battery has between 50 and 75 percent charge.  Two blunks denotes that you have between 25 and 50 percent charge in the speaker’s battery.  And finally, one blunk means between 0 and 25 percent charge.

Also, when the UE Wonderboom 1 battery gets critically low, the Power lamp starts flashing red.

Press these buttons any time the speaker is ON, to check the battery.  The number of blunks you hear, lets you roughly guess how much time you have left to play the speaker, before it goes dead.  Since a fully charged UE Wonderboom 1 plays for roughly ten hours.  So four blunks means that the speaker has between 7.5 and 10 hours of play time left before it goes dead.  Three blunks means that it will play for another 5 to 7.5 hours.  Two blunks means between 2.5 and 5 hours of music time left.  And 1 blunk means that you’ll get between 0 and 2.5 more hours of play time.

Other UE Wonderboom 1 Posts

    1. How to Put in Pairing Mode
    2. How to Turn ON
    3. How to Check Charge
    4. Pairing with Google
    5. Buttons Guide

References

    1. Official UE Wonderboom 1 Support Page
    2. Where to Buy the UE Wonderboom 1
admin

Recent Posts

How to Reset Honeywell WiFi Thermostat Settings

This post explains How to Reset Honeywell WiFi Thermostat Settings. We demonstrate this on the…

4 hours ago

How to Reset Time and Day on Honeywell Thermostat

.You can manually set the time and day on the Honeywell thermostat. But only when…

4 hours ago

Hard Reset Honeywell Thermostat

This post gives the Hard Reset Honeywell Thermostat routine. We show this on the RTH9580WF…

4 hours ago

Honeywell Thermostat Hard Reset

This post gives the Honeywell Thermostat Hard Reset routine. We show this on the RTH9580WF…

5 hours ago

Honeywell WiFi Thermostat Factory Reset

This post gives the Honeywell WiFi Thermostat Factory Reset routine. We show this on the…

5 hours ago

Honeywell RTH9580WF Reset

This post gives the Honeywell RTH9580WF Reset routine for this smart programmable thermostat. We show…

5 hours ago