Here, we demo UE Wonderboom 1 factory reset instructions which restore the factory default settings to the Wonderboom. It works as follows.
Factory resetting wipes any memorized Bluetooth devices from the unit’s memory. Thus, this prevents the UE Wonderboom 1 from pairing to any nearby Bluetooth devices after the factory reset. Further, you might reset the speaker to re gift it. Or, you just wish to stop its auto pairing with devices you no longer play through lt.
Press and release the Power button. The status lamp in that button lights and you hear a power-up sound. We circle the Power button in the next picture.
Then, the status light comes on solid or it blinks, as shown next.
The UE Wonderboom 1 makes a unique sounding turn-on noise. The speaker is then ready for factory reset when this sound ends.
Now it may or may not pair with a device. That depends on whether you have any in-range Bluetooth devices that know about the UE Wonderboom 1 and that it have previously paired with as well. Yet whether paired or not, this factory reset procedure works the same way, as follows.
The UE Wonderboom 1 does not appear to respond to factory reset requests while linked with a source Bluetooth device. So, unpair it before factory resetting.
Find the Power and Volume DOWN buttons. E.g. The Power button is on the top of the speaker, near the front. Volume DOWN is the long vertical line on the front, near the bottom. See these both that we point out with the green arrows in the next picture.
The UE Wonderboom 1 then enters factory reset.
Next, in a few seconds, the unit powers off as the hard reset completes. The falling electronic ka-plunk sound plays. Finally, the status lamp in the Power button goes dark.
Next, power on the UE Wonderboom 1 again, as detailed in step 1 above.
After a factory reset, the unit comes up in ready-to-pair mode again, with the pairing lamp rapidly flashing white.
Hard reset is done now. So go ahead and let a friend or stranger use this speaker. Or pair it again with your favorite Bluetooth devices.
Then, the UE Wonderboom 1 no longer auto connects with any previously paired Bluetooth devices. Thus, to restore automatic BT pairing, you pair this speaker by hand with your desired device(s). After that, any time that both the UE Wonderboom 1 and device have Bluetooth turned on, pairing again occurs without you having to do anything.
Don’t forget to delete any now-stale connections to Wonderboom 1 from your source Bluetooth devices that you set up prior to factory resetting the speaker. These will no longer work. So you’ll want to “forget” them in your source device’s settings pages.
This post demos How to Pair JBL Flip 4 Bluetooth Speaker With Amazon Echo Dot…
In this piece, we detail our Samsung J7 force restart instructions for the Galaxy J7…
Covers Fixing WiFi Problems on Honeywell RTH9580WF. Now this thermostat offers remote control convenience via…
For both top loader and front loader washing machines, HE and traditional, the ways How…
This post gives JBL Charge 3 Pair With iOS directions, including pairing with the iPhone,…
Covers the Play PC Music On Google Home procedure. But why would you want to…