The UE Wonderboom 1 has two light LEDs that may be flashing. There’s the Bluetooth pairing lamp. Also there’s the charging lamp, in the Power button. These are both on the top of the unit. The pairing lamp flashes when pairing mode is active, and the charge lamp flashes when the UE Wonderboom 1 is charging. Details on both of these Light Flashings follow.
When the Pairing button flashes white, the UE Wonderboom 1 is in discovery or pairing mode.
The Power lamp flashes white while the UE Wonderboom 1 is recharging.
This light flashes in a gradually dimming and brightening pattern. On this speaker, this LED is the only visual indication that charging is happening. But it does not tell how far along the charging is.
It flashes during charging whether the UE Wonderboom 1 is OFF or ON.
As charging continues, the light keeps slowly flashing white. Furthermore, battery recharging is over when the lamp goes out, or turns solid white. It turns OFF when the speaker is OFF, and switches to a solid white glow when the speaker is ON.
The battery recharge cycle finishes when the speaker status lamp turns OFF. Even with the AC charger running, the lamp does not glow when battery is full. Not unless the speaker itself is running.
This post explains How to Reset Honeywell WiFi Thermostat Settings. We demonstrate this on the…
.You can manually set the time and day on the Honeywell thermostat. But only when…
This post gives the Hard Reset Honeywell Thermostat routine. We show this on the RTH9580WF…
This post gives the Honeywell Thermostat Hard Reset routine. We show this on the RTH9580WF…
This post gives the Honeywell WiFi Thermostat Factory Reset routine. We show this on the…
This post gives the Honeywell RTH9580WF Reset routine for this smart programmable thermostat. We show…