UE Wonderboom 1 Not Connecting

This post explains how to avoid the UE Wonderboom 1 Not Connecting problem, by giving the correct way to pair it. This shows pairing to a typical smart device so that you may play music on that device and have it come through the UE Wonderboom 1. Start with your UE Wonderboom 1 shut OFF (all dark LEDs). Then, follow along for pairing it with phones, tablets, laptops, media players, et al.

UE Wonderboom 1 Not Connecting: The Right Way to Do It

1. Visit the Home Screen of your Smart Device

Press the Home button to get to the  Home   page.  See our screen as shown next.

3. Find the  Settings  App

We found ours on the second page of the  Home  screen.

3. Bring up the Settings App

Tap the Settings app icon.  Find this pointed at in the last picture.

The iPhone then displays the first page of its  Settings  screen, as shown in the next screenshot

4. Go to the Bluetooth Settings Page to Continue with UE Wonderboom 1 Not Connecting Solution

Tap the  Bluetooth  item, as pointed at by the green arrow in the last screenshot.

The Bluetooth Settings screen then appears as follows. Note that our Bluetooth should be switched ON here.

But since the 3 is currently OFF, it does not show in either the  My Devices  or  Other Devices lists on the tablet yet,  Why?  Because we have yet to connect it with this device for the first time.  Plus, the 3 is not yet transmitting its Bluetooth connection info. See this scenario, that appears as shown next.

Note in this picture that no UE Wonderboom 1 appears yet.

5. Power Up your UE Wonderboom 1

Turn on the unit by quickly pressing its  Power  button.

The unit then comes on, and announces this with a rising electronic sound.  The Power button also lights up.

If the 3 does not come on, then see our  UE Wonderboom 1 Power Button Not Working Fixes piece to solve this.

6. Put your UE Wonderboom 1 into Discovery Mode

Now, to see the 3 on your iPhone, place it into BT discovery mode. For that, press and hold the Bluetooth button located as we see in the next picture. It’s on the top, at the twelve o’clock position in he buttons panel. Release the button when you hear the rising plunks sound.

Also, a lamp in this button starts quickly flashing white.

7. Find your UE Wonderboom 1 on your Smart Device

See the picture next

8. Pair with the Speaker

Tap the listed speaker in the  Other Devices  section of the  Bluetooth Devices  list, shown above. If the unit does not appear on the source device, try moving it closer, powering it off and then back on again. Or at worst, you may have to reset the UE Wonderboom 1.

Your device then connects with the 3 (appears as “WONDERBOOM 3” in this demo).

The  Bluetooth Settings  screen then changes to display something like the following.

Note that the UE Wonderboom 1 now appears as connected, as pointed out in the last picture.

9. Done with the UE Wonderboom 1 Not Connecting Answer

Lastly, we have now successfully paired the 3 with the test  source device.  So now, audio output from that device now plays on the 3.

Other UE Wonderboom 1 Posts

1. 1. The Watts Figures
   2. How to Turn ON
   3. Won’t Turn ON
   4. Flashing White Light

References for UE Wonderboom 1 Not Connecting

1. 1. Official UE Wonderboom 1 Support Page
   2. Where to Buy the UE Wonderboom 1