UE Wonderboom 1 Pair With iPhone

This post gives the UE Wonderboom 1 Pair With iPhone procedure. First, start with your UE Wonderboom 1 shut OFF (all dark LEDs). Then, follow along to pair it with iPhone.

UE Wonderboom 1 Pair With iPhone: Step by Step

1. Visit the Home Screen on your iPhone

First off, press the Home button to get to the  Home   iPad page.  See our  Home  screen as shown next.

2. Find the  Settings  App

Secondly, we found ours on the second page of the  Home  screen.

3. Bring Up the Settings App

Then, tap the Settings app icon.

The iPhone then displays the first page of its  Settings  screen, as shown in the next screenshot

4. Go to the Bluetooth Settings Page to Continue with UE Wonderboom 1 Pair With iPhone

Next, tap the  Bluetooth  item, as pointed at by the dark green arrow in the last screenshot above.

Our  Bluetooth Settings screen then appears as follows. Note that our Bluetooth is switched ON here. But since the UE Wonderboom 1 speaker is currently OFF, it does not show in either the  My Devices  or  Other Devices lists on the tablet yet,  Why?  Because we’ve not yet paired it with this device before.  Plus, the speaker is not yet transmitting its BT connection info. See this scenario, that appears as shown next.

Note in this picture that there’s no UE Wonderboom 1 speaker appears yet.

5. Turn ON the UE Wonderboom 1

Turn on the speaker by quickly pressing its  Power  button. See this button, circled in green, in the next picture.

The speaker then comes on.

6. Put your UE Wonderboom 1 in Pairing Mode

Now, to see your UE Wonderboom 1 speaker on your iPhone, place the WB into BT pairing mode. For that, press and release the Bluetooth button, as circled in the next picture.

When you press this Pairing button, the speaker makes a distinctive sound several times. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture above.

7. Find Your UE Wonderboom 1 on your iPhone

See the picture next. We found ours, as pointed out with the dark blue arrow next.

8. Pair with your UE Wonderboom 1

Tap the listed speaker in the  Other Devices  section of the  Bluetooth Devices  list, shown above.

Your iPhone then pairs with the UE Wonderboom 1 (appears as “WONDERBOOM” in this demo).

The  Bluetooth Settings  screen then changes to display something like the following.

Note that the UE Wonderboom 1 speaker now appears as connected, as circled inside the green oval in the last picture.

9. Done with UE Wonderboom 1 Pair With iPhone !

We have now successfully paired our UE Wonderboom 1 Bluetooth speaker with our iOS device like the iPhone.  Audio output from that source device now plays on this wireless  speaker, which is what you want.  The same happens with most other Bluetooth devices.

Other UE Wonderboom 1 Posts

1. 1. How to Adjust the Volume
   2. Won’t Turn ON or Charge Troubleshooting
   3. Restricted Firmware Updating
   4. How to Check Battery
   5. How Do I Know When My Wonderboom Is Fully Charged

References for UE Wonderboom 1 Pair With iPhone

1. 1. Official UE Wonderboom 1 Support Page
   2. Where to Buy the UE Wonderboom 1