UE Wonderboom 2 Bluetooth Speaker Pairing Mode

Top view of the Wonderboom 2. Showing the -Bluetooth Pairing- button.

To pair your UE Wonderboom 2 Bluetooth Speaker with a BT source device for the first time, or to update stale connection information in that device, you have to know about UE Wonderboom 2 Bluetooth Speaker Pairing Mode. Why? Because in this mode, the speaker transmits its name and currently valid connection data over the Bluetooth airwaves, which enables other nearby Bluetooth devices to pair to it. So in this post, we show this mode in action to link it with phones, tablets, computers, and smart speakers.

UE Wonderboom 2 Bluetooth Speaker Pairing Mode: Step by Step

1. Turn On the UE Wonderboom 2 Bluetooth Speaker

Firstly, turn on the speaker by rapidly pressing its Power button.

E.g. See this button that we point at with the yellow arrow, in the next picture.

The Top of the UE Wonderboom 2 Bluetooth Speaker. Showing the dark -Power- button.

The speaker then comes on, as pictured next.

Top view of the speaker, powered ON, with its -Power-button lit and highlighted.

2. Press the Pairing / Discovery Mode Button for Two to Three Seconds

Secondly, to be able to discover your speaker on your source Bluetooth device, place it in pairing mode. For that, press and hold the the Pairing button, as circled in the next picture.

The -Pairing Mode- button circled.

When you press this Pairing button, the speaker makes a cool pairing sound. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture, circled in yellow.

3. Done !

Finally, while the Pairing button is blinking, the speaker is now in pairing mode. So you should see your UE Wonderboom 2 Bluetooth Speaker on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as shown next.

iPadOS Bluetooth Settings page, showing the UE Wonderboom 2 Bluetooth Speaker as found and highlighted.