Picture of the top of the Wonderboom 2 powered ON. Showing the -Power-button glowing white.

UE Wonderboom 2 Speaker Power Button Not Working

When the Power button on your UE Wonderboom 2 Speaker is not working, this likely means one or more things as follows.

    1. Dead Battery.  The internal battery is empty needs a recharge for continued speaker operation. Use a commercially available USB charger to do this.
    2. Faulty AC Adapter.  The power adapter charger is defective.  So replace it with a charger that delivers 5 volts, at 1.0 amps (5 watts).
    3. Faulty Power Port.  The micro USB input port for charging may be damaged, an often-seen on this model. So replace this if you have the necessary skills.
    4. Bad Battery. That battery no longer recharges due to extreme age, repeatedly overcharging, very long storage, or heavy use. Replace the battery in this case with one that delivers 3.8 volts at 2.1 amp hours (7.98 watt-hours).
    5. Dirty Button Panel.  The button panel has sand, dirt, or other debris preventing the Power button from making proper contact when you press it. For this, you can, if so skilled, clean the switches by disassembling and blowing or brushing out the contact area.
    6. Button Panel Has Failed.  The switch panel is defective, and the solution for this cause of the UE Wonderboom 2 speaker power button not working, is to replace it. These parts are often available on eBay.
    7. Faulty UE Wonderboom 2 Speaker. Your speaker is broken beyond repair. If you determine this, then the best bet is just to get a new one.
Picture of the front of the UE Wonderboom 2 Speaker.
Front view of the UE Wonderboom 2 Speaker.

Other UE Wonderboom 2 Speaker Posts

    1. Not Charging
    2. How to Turn OFF
    3. How to Reset
    4. Charger
    5. How to Connect to iPhone

References

    1. Official UE Wonderboom 2 Speaker Support Page
    2. Where to Buy the UE Wonderboom 2 Speaker