Two light LEDs may be flashing white on the UE Wonderboom 3. There’s the Bluetooth pairing lamp. Also there’s the charging lamp, in the Power button. These are both on the top of the unit. The pairing lamp flashes when pairing mode is active, and the charge lamp flashes when the UE Wonderboom 3 is charging. Details on both of these flashing white lights follow.
When the Pairing button flashes white, the UE Wonderboom 3 is in discovery or pairing mode.
The Power lamp flashes white while the UE Wonderboom 3 is recharging.
This light flashes in a gradually dimming and brightening pattern. On this speaker, this LED is the only visual indication that charging is happening. But it does not tell how far along the charging is.
It flashes during charging whether the 3 is OFF or ON.
As charging continues, the light keeps slowly flashing white. Furthermore, battery recharging is over when the lamp goes out, or turns solid white. It turns OFF when the speaker is OFF, and switches to a solid white glow when the speaker is ON.
The battery recharge cycle finishes when the speaker status lamp turns OFF. Even with the AC charger running, the lamp does not glow when battery is full. Not unless the speaker itself is running.
This piece covers Troubleshooting Honeywell Thermostat Not Reaching Set Temperature problems and how to solve…
In this piece, we show ways for Finding Internet Radio Stream URL. You may own…
Here, we show how to factory reset a Wonderboom to put it back to its…
Gives the connect Logitech Wonderboom to iPhone procedure. Now this can also work with other…
This post gives the Alexa Dot Bluetooth Pairing procedure. These directions include the all Bluetooth…
You can reset all of the smart speakers in the Google Home family. These include…