Here, we demo UE Wonderboom reset. This restores the factory default settings to the UE. The hard reset on this UE Boom line of wireless Bluetooth speakers works as follows.
Resetting UE Wonderboom wipes any memorized Bluetooth devices from memory. Clearing this data prevents the UE from pairing to any nearby Bluetooth devices after the factory reset. Further, you might reset the Wonderboom to re gift it. Or, you just wish to stop its auto pairing with devices you no longer play through lt.
Press and release the Power button. The status lamp in that button lights and you hear a power-up sound. We’ve circled the Power button in the next picture.
Then, the status light comes on solid or it blinks, as shown next.
The UE Wonderboom makes a unique sounding turn-on noise. The UE is then ready for reset when this sound finishes. It may or may not pair with a device. That depends on whether you have any in-range Bluetooth devices that know about the Wonderboom and that it have previously paired with as well. Whether paired or not, this reset help works the same way, as follows.
Some UE models do not respond to reset requests while connected with a source Bluetooth device. So, unpair the UE Wonderboom before resetting.
Find the Power and Volume DOWN buttons. The Power button is on the top of the speaker, near the front. Volume DOWN is the long vertical line on the front, near the bottom. See these both pointed out by the green arrows in the next picture.
The Wonderboom then enters hard factory reset. In a few seconds, the unit powers off when reset completes. The falling electronic ka-plunk sound plays. Then the status lamp in the Power button goes dark.
Next, power on the UE again, as detailed in step 1 above.
After a reset, the Wonderboom comes up in ready-to-pair mode again, with the pairing lamp rapidly flashing white.
Reset is done now. So go ahead and let someone else use this speaker. Or pair it again with your favorite Bluetooth devices.
After a reset, the UE no longer auto connects with any previously paired Bluetooth devices. Thus, to restore automatic BT pairing, you pair by hand the Wonderboom with your desired device(s). Then any time that both the UE and device have Bluetooth turned on, pairing again occurs without you having to do anything.
Don’t forget to delete any now-stale connections to UE Wonderboom from your source Bluetooth devices that you set up prior to hard resetting the speaker. These will no longer work. So you’ll want to “forget” them in your source device’s settings pages.
Temperature differential is the difference between the turn-on and turn-off temperatures on a thermostat, whether…
The Honeywell Thermostat Waiting on Equipment Messages sometimes appears on these smart thermostats. So these…
Honeywell provides good manuals for their WiFi smart thermostats. The same is true of the…
Gives our Honeywell Touchscreen Thermostat RTH7600D Review here. Now RTH7600D works with both central heating…
Here's our Honeywell Wi Fi Smart Thermostat RTH9580WF Review. Now the RTH9580WF is a clear…
This post gives Honeywell RTH9580WF WiFi setup directions for this touchscreen smart thermostat. Use this…