Picture of the HP DeskJet printer 3632 in box, showing the Box front view.

Unboxing the HP DeskJet 3632 Printer

Just bought this HP DeskJet 3632 Printer for a customer, and she asked us to set up this printer at her place. Part of the 3630 All-In-One series of HP printers, we chose the 3632 because it can easily print documents and pictures wirelessly from mobile devices (tablets and phones).

Anyway, the first part of the setup was to unbox this printer.  Thus, we detail here unboxing the HP Deskjet 3632 printer safely.  We show what comes with the printer as well.  So, let’s get started.

Picture of the printer in its box, showing the box front view. Unboxing HP DeskJet 3632.
HP DeskJet printer 3632 in box, showing the Box front view. Unboxing HP DeskJet 3632.

Unboxing HP DeskJet 3632 Printer, Step by Step Instructions

1. First Off, Sit Box on its Bottom End

See this as shown in the next picture.

Picture of the printer box top view.
HP 3632 DeskJet printer, box top view.

2. Then Slice the Clear Sealing Tape while Unboxing HP DeskJet 3632 All In One Home Printer

The tape runs across the top opening of the box, in the middle, where the two box flaps meet underneath the tape.





See the open box top in the next picture.

Picture of the printer in box, with open box top. Unboxing HP DeskJet 3632.
HP 3632 printer, In box, with open box top. Unboxing HP DeskJet 3632.

3. Next, Slide Printer Out of Box

Note that it’s inside some Styrofoam supports.  These also slide out along with the printer.   In the next picture, we removed our printer from the box. Note the Styrofoam supports still encasing the sides of the printer.

Picture of the printer with user guides and software disc out of box, with blue tape highlighted.
HP printer 3632 with user guides and software disc out of box, with blue tape highlighted.

4. Then, Remove Styrofoam Supports from Printer

While doing so, be careful not to let the printer fall and bump against the table / floor.

E.g. Next, we see the printer with the packing supports removed.

Picture of the printer with packing removed, top view. Unboxing HP DeskJet 3632.
DeskJet 3632 printer with packing removed, top view.

5. Next in Unboxing HP DeskJet 3632, Remove Cellophane from Printer

See this as shown next.

Picture of the printer 3632, with clear wrap removed, top view.
DeakJet HP printer 3632, with clear wrap removed, top view.

6. Pull Open the Outer Access Panel

Facing the printer as shown in the last picture, we find the front panel latches on the left and right front corners of the printer, near the top.  Furthermore, the plastic door opens downward, as shown in the next picture.





7. Then Remove all Blue Tape and Loose Cardboard from Printer

Note the typical locations of this tape in the next picture, as pointed at by the pink arrows.

Picture of the printer with front panel open, and blue tape highlighted. Unboxing HP DeskJet 3632.
HP DeskJet printer 3632 with front panel open, and blue tape highlighted.

8. Open the Inner Access Panel

Inside the outer chamber, find  the inner access panel latch.  It’s near the top, just beneath the blue tape with the arrows at the top center of the 3632.

Then insert an index finger, and gently push down while at the same time, pulling the hatch outward.  See the result in the next picture.

Picture of the printer with inner access panel open, showing box with cords inside.
HP DeskJet 3632 printer with inner access panel open, showing box with cords inside. Unboxing HP DeskJet 3632.

9. Then Remove and Open Inner Box

See this small box as shown inside the printer in the last picture, with the piece of blue tape dangling from it.  Further, this contains the cables and ink cartridges.

10. Check that you have All Accessories

You should have received two (2) #63 ink cartridges (one black, and one color), a power cord, and a USB cable, as displayed in the next picture.

Picture of the printer with included cartridges and cords, showing top view. Unboxing HP DeskJet 3632.
HP DeskJet printer 3632, with included cartridges and cords, showing top view.

11. Find Software CD Disc

Ours was inside the user guide booklets, and looks as follows.

Picture of the printer software disc, version 35.0, top view.
HP 3630 All In One series printers software disc, version 35.0, top view.

12. Done Unboxing the HP Deskjet 3632 Printer At Last!

At last, you have successfully unboxed the HP DeskJet 3632 All-in-One printer scanner copier.  Congratulations!

Next. we detail how to set up this printer in our HP DeskJet 3632 Wireless Setup Instructions  piece.

Related Posts to Unboxing the HP Deskjet 3632 Printer

    1. Unboxing Sony DVP SR210P CD DVD Player
    2. Google Home Mini Unboxing, Step by Step
    3. Unboxing the Google Home Voice Activated Speaker
    4. Microsoft Invoke Cortana Speaker Unboxing Help
    5. Unboxing Samsung Galaxy J7 Sky Pro Smart Phone

Other Posts About HP DeskJet Printers

    1. How to Connect HP DeskJet 3632 to WiFi
    2. How to Setup WiFi on HP Deskjet 3632 Printer
    3. Reset HP DeskJet 3630 Printer Instructions
    4. How to Reset the HP Deskjet 3632
    5. How to Install HP DeskJet 3630 Series WiFi Printer

References for Unboxing the HP Deskjet 3632 All in One Printer

    1. About the HP Deskjet 3632 Printer Video, at YouTube.com

Revision History

    • 2019-07-20: Added key phrase targeting for ‘Unboxing HP Deskjet 3632’, removed ad code scripts, and added more tags and links.
    • 2018-12-07: Added more subheadings.
    • 2017-01-22: Originally published.