Unlocking Honeywell Home Thermostat Instructions

Honeywell RTH9580WF smart thermostat, displaying its -Please Enter Your Password- Screen, with passcode 2752 entered.

Many Honeywell Home Thermostat models, have a lock screen mode. This keeps anyone from messing with t-stat settings without first putting in a password. You set this pass code when locking your t-stat. Then, to unlock it, it prompts you to enter this secret code. And doing so again grants full access to settings. These include WiFi, temperature, scheduling, and other HVAC settings. So here we give instructions on Unlocking Honeywell Home Thermostat. We show this on the RTH9580WF programmable WiFi thermostat.

This demo begins with our t-stat locked. We also assume that the t-stat is showing its Home page.

The Honeywell Home thermostat, front view after initial setup.

Unlocking Honeywell Home Thermostat Instructions, Step by Step

1. On the Home Screen, Tap the MENU Option

Find the MENU button in top right corner of that page. Note that even when the t-stat in lock mode, the MENU button still works.

This then displays the main menu page. But you might have to press the down-arrow button several times to reach the Security Settings option.

The next picture shows the main menu, already scrolled, to show the Security Settings item.

The thermostat displaying its main menu, with the -Security Settings- option highlighted.

2. Tap the Security Settings Option

A password protected Honeywell Home Thermostat then shows the Please enter your password prompt screen, as shown next.

The -Please Enter Your Password- screen, with no passcode entered yet.

3. Enter the Pass Code

Enter the code you assigned when you created the password. In this scenario, our security code is 2752. So, we enter the correct digit for each slot with the UP and DOWN arrows above and below each position.

Again, Unlocking allows access to the Security Settings menu. There you can either fully unlock, partially lock, or remove the password altogether.

The -Please Enter Your Password- Screen, with pass code 2752 entered.

4. Press the Done Button to Continue with Unlocking your Honeywell Home Thermostat

Tap Done once you’ve punched in the pass code, the thermostat then shows the Security Settings screen, as shown next.

From here, you could choose either of the following.

- Delete the Security Settings password.
- Change the lock mode while leaving the existing password in place.

You need not remove the password to unlock the thermostat. Nor must you change the lock mode in order to remove the password.

The -Security Settings- screen, showing the -Remove Password- button with the -Change Lock Mode- button highlighted.

5. Tap the Change Lock Mode Button

This then displays the Change Lock Mode screen, that shows the Fully Locked option highlighted in blue.

The -Security Settings- screen, with the -Unlocked- button highlighted.

6. Tap the Unlocked Button

This unlocks the thermostat and returns you to the Security Settings screen, as shown next.

The -Security Settings- screen, with the -Previous Menu- button highlighted.

7. Tap the Previous Menu Button

So this returns you to the main menu. Note that all menu items are now available. So verify this by scrolling down through them. If you see the following items such as…