Bluetooth Speakers

Wonderboom 1 Check Battery

Covers the Wonderboom 1 check battery procedure, and also, how to know if the battery is degrading over time.

Wonderboom 1 Check Battery: Step by Step

1. First, Turn ON the Wonderboom 1

You won’t be able to read battery charge status unless the speaker is ON.

The Wonderboom 1 top view. Showing the dark -Power- button.

To turn on the speaker, press and release the Power button, circled in the last picture.

The little lamp in that button should then come on, as shown next, and the speaker should make its startup sound.  If it does not, then the battery could be completely dead.

The Wonderboom 1 powered ON. Showing the glowing -Power- button. Gives some indication of battery charge present.

But as long as there’s some juice in the battery, the speaker should power up.  When it does, move on to the next step.

2. Press and Release the Volume UP and Volume DOWN Buttons to Hear the Wonderboom 1 Battery Check Announcement

Press and release the center areas of the Volume UP and Volume DOWN buttons at the same time.  Find these areas in the picture shown next.

The -Volume UP(+)- and -Volume DOWN (-)- buttons.

When you press these buttons together, the speaker makes one to four “blunk” sounds to tell you how high the battery is.  Four blunks means that the battery has between 75 and 100 percent charge.  Three blunks, and the battery has between 50 and 75 percent charge.  Two blunks denotes that you have between 25 and 50 percent charge in the speaker’s battery.  And finally, one blunk means between 0 and 25 percent charge.

Also, when the Wonderboom 1 battery gets critically low, the Power lamp starts flashing red.

Press these buttons any time the speaker is ON, to check the battery.  The number of blunks you hear, lets you roughly guess how much time you have left to play the speaker, before it goes dead.  Since a fully charged Wonderboom 1 plays for roughly ten hours.  So four blunks means that the speaker has between 7.5 and 10 hours of play time left before it goes dead.  Three blunks means that it will play for another 5 to 7.5 hours.  Two blunks means between 2.5 and 5 hours of music time left.  And 1 blunk means that you’ll get between 0 and 2.5 more hours of play time.

Other Wonderboom 1 Posts

    1. How to Reset to Fix Problems
    2. How to Turn OFF
    3. Won’t Turn OFF
    4. Connecting to

References for Wonderboom 1 Check Battery

    1. Official Wonderboom 1 Support Page
    2. Where to Buy the Wonderboom 1
admin

Recent Posts

Remove Permanent Hold on Honeywell Thermostat

Covers the Remove Permanent Hold on Honeywell Thermostat procedure. Now this indeed begs the question…

47 mins ago

How Do You Tell That JBL Flip 3 is Charging

How Do You Tell That JBL Flip 3 is Charging?  Well, this Bluetooth speaker sports…

56 mins ago

Remove Temporary Hold on Honeywell Thermostat

Here, we give the Remove Temporary Hold on Honeywell Thermostat procedure. Now this begs the…

1 hour ago

Honeywell WiFi Thermostat Wiring Instructions

The most "meaty" part of installing a new Honeywell WiFi thermostat, is correctly wiring it…

2 hours ago

Setting Temperature Differential on Honeywell RTH9580WF Thermostats

Temperature differential is the difference between the turn-on and turn-off temperatures on a thermostat, whether…

5 hours ago

Cancel Hold on Honeywell Thermostat

Here, we give the Cancel Hold on Honeywell Thermostat procedure. But why would hold ever…

5 hours ago