Here, we demo the Wonderboom 1 How to Hard Reset procedure. This restores the factory default settings to the unit, and it works as follows.
Hard resetting wipes any memorized Bluetooth devices from the unit’s memory. Thus, this prevents the Wonderboom 1 from pairing to any nearby Bluetooth devices after the hard reset. Further, you might reset the speaker to re gift it. Or, you just wish to stop its auto pairing with devices you no longer play through lt.
Press and release the Power button. The status lamp in that button lights and you hear a power-up sound. We circle the Power button in the next picture.
Then, the status light comes on solid or it blinks, as shown next.
The Wonderboom 1 makes a unique sounding turn-on noise. The speaker is then ready for hard reset when this sound ends.
Now it may or may not pair with a device. That depends on whether you have any in-range Bluetooth devices that know about the Wonderboom 1 and that it have previously paired with as well. Yet whether paired or not, this hard reset procedure works the same way, as follows.
The Wonderboom 1 does not appear to respond to hard reset requests while linked with a source Bluetooth device. So, unpair it before resetting.
Find the Power and Volume DOWN buttons. E.g. The Power button is on the top of the speaker, near the front. Volume DOWN is the long vertical line on the front, near the bottom. See these both that we point out with the green arrows in the next picture.
The Wonderboom 1 then hard resets.
Next, in a few seconds, the unit powers off as the hard reset completes. The falling electronic ka-plunk sound plays. Finally, the status lamp in the Power button goes dark.
Next, power on the Wonderboom 1 again, as detailed in step 1 above.
After a hard reset, the unit comes up in ready-to-pair mode again, with the pairing lamp rapidly flashing white.
Hard reset is done now. So go ahead and let a friend or stranger use this speaker. Or pair it again with your favorite Bluetooth devices.
Then, the Wonderboom 1 no longer auto connects with any previously paired Bluetooth devices. Thus, to restore automatic BT pairing, you pair this speaker by hand with your desired device(s). After that, any time that both the Wonderboom 1 and device have Bluetooth turned on, pairing again occurs without you having to do anything.
Don’t forget to delete any now-stale connections to Wonderboom 1 from your source Bluetooth devices that you set up prior to hard resetting. These will no longer work. So you’ll want to “forget” them in your source device’s settings pages.
You might need to know How to Connect Honeywell Wireless Thermostat to Router for the…
You might need to know the Connect Honeywell Thermostat to WiFi procedure, to do this…
You might need to know How to Connect Honeywell Thermostat to WiFi for the first…
You might need to know How to Connect Honeywell Thermostat to Router for the first…
You might need to know How to Connect Honeywell WiFi Thermostat to Router for the…
You might need to Connect Honeywell WiFi Thermostat to Router for the first time, or…