Wonderboom 2 Pairing Two Speakers

Describes how to pair 2 Wonderboom 2 speakers such that they both play the same audio content from one source device.  Here we have one Wonderboom 2 1, and one Wonderboom 2 2 speaker to show how pairing 2 Wonderboom 2 speakers works. But of course you can also pair two Wonderboom 2 1’s or two Wonderboom 2 2’s.

Wonderboom 2 Pairing Two Speakers: Step by Step

1. Power Up Both Speakers

We show the Power buttons on each of our Wonderboom 2s in the next pictures.

Press and let go of the Power button on the first one, and await the power-ON sound.

Then, press and release the Power button on the second Wonderboom 2, and again, wait for it to come on.

2. Wonderboom 2 Pairing Two Speakers: Pair the First with a Source Device

In this demo, we’ll first link the Wonderboom 2 1 speaker with our iPad Air tablet.  Now maybe you’re not sure how to connect your Wonderboom 2 to a Bluetooth device. If you are not, then see our  How to Pair Wonderboom 2 Speakers with Bluetooth Devices   post for details.

3. Press and Release the Play / Pause Button on the First Speaker

Next, press the middle (Play / Pause) area of the Wonderboom 2 you just connected. Then hold until the speaker makes a pairing sound and the Bluetooth lamp starts fast-flashing.  In this scenario, our first speaker is the original Wonderboom 2 (the first version of this series).

4. Press the Play / Pause Button on the Second Wonderboom 2

Next, press and release the middle area of the second Wonderboom 2.  In this scenario, ours is the second version of the Wonderboom 2 (Wonderboom 2).

The speaker then makes a ready-to-connect sound. Then the pairing light just above the center button blinks briefly.  Finally, once this speaker pairs with the first Wonderboom 2, the Bluetooth lamp glows steadily.

5. Done with How to Wonderboom 2 Pairing Two Speakers !

Your two Wonderboom 2s now share a common pairing with the source device.  Thus, when you play audio on your source device, you’ll now hear it through both Wonderboom 2 speakers.

Note that each Wonderboom 2 provides stereo sound. And this holds true even when you have two of them joined to each other.  In other words, each speaker provides stereo whether or not it connects to another Wonderboom 2.  Thus the first Wonderboom 2 does not play only the left channel. Nor does the second play only the right. Instead, both Wonderboom 2s play both channels, in stereo, in fact.

Wonderboom 2 Pairing 2 Speakers: Breaking the Connection

To break the pairing between the two Wonderboom 2 speakers, simply power down the second one.  After that, the first one (the one that you paired with your Bluetooth device) continues playing.

Now powering down the first of the speakers will also break the connection between it and the second. Then the second speaker stops playing.  But this also breaks the link with the source BT device.  So powering OFF the first speaker stops BOTH speakers from playing. But remember that the second one will still be ON until you turn it off.

Other Wonderboom 2 Posts

1. 1. Factory Reset
   2. Pair
   3. Charging Light
   4. Firmware Update
   5. Connecting to

References

1. 1. Official Wonderboom 2 Support Page
   2. Where to Buy the Wonderboom 2