The Wonderboom has two light LEDs that may be flashing. There’s the Bluetooth pairing lamp. Also there’s the charging lamp, in the Power button. These are both on the top of the unit. The pairing lamp flashes when pairing mode is active, and the charge lamp flashes when the Wonderboom is charging. Details on both of these Light Flashings follow.
When the Pairing button flashes white, the Wonderboom is in discovery or pairing mode.
The Power lamp flashes white while the Wonderboom is recharging.
This light flashes in a gradually dimming and brightening pattern. On this speaker, this LED is the only visual indication that charging is happening. But it does not tell how far along the charging is.
It flashes during charging whether the Wonderboom is OFF or ON.
As charging continues, the light keeps slowly flashing white. Furthermore, battery recharging is over when the lamp goes out, or turns solid white. It turns OFF when the speaker is OFF, and switches to a solid white glow when the speaker is ON.
The battery recharge cycle finishes when the speaker status lamp turns OFF. Even with the AC charger running, the lamp does not glow when battery is full. Not unless the speaker itself is running.
Here, we show how to factory reset a Wonderboom to put it back to its…
Gives the connect Logitech Wonderboom to iPhone procedure. Now this can also work with other…
This post gives the Alexa Dot Bluetooth Pairing procedure. These directions include the all Bluetooth…
You can reset all of the smart speakers in the Google Home family. These include…
Here, we walk you through How to Install HP DeskJet 3630 Series Wireless Printer. In…
Perform this HP DeskJet 3632 setup routine to clear out the existing WiFi setting. You…