Adapters

Amazon Echo Dot 3rd Generation Power Cable Specs

Here we cover the Amazon Echo Dot 3rd generation power cable specs.  This is the wall plug that comes with the Echo Dot 3 smart speaker.

First,, the US version of this adapter has non folding AC prongs.  It also has a six-foot long non removable cord. Further, it is light weight for the 15 watt power output. It is square yet with modest width and height. This 12-volt supply fits into a standard power strip or wall outlet therefore.  But it blocks no nearby outlets, as we show next.

An Amazon Echo Dot 3rd Generation smart speaker powering up, showing its AC adapter in a standard wall outlet.

Yet this supply silently outputs that 15 watts of power.  Also, it provides good regulation. This allows this little speaker to play deeper bass, crisp treble, and decent audio volume.

Further, this is not a low-budget adapter. It appears well built.  Also, it runs with little heating, even at higher volumes. And it emits little if any RFI noise. But while not easy to repair, the low cost makes fixing a near pointless exercise.

The prong side of the Echo Dot 3rd Generation power adapter: Model # GP92NB.

Amazon Echo Dot 3rd Generation Power Cable Specs: The Details

Echo Dot 3rd Gen power supply. Model: GP92NB. LO P/N PA-1150-9ABN. Input: 110-240 volts, 50-60 Hz., 0.5 Amps Max. Output: 12 volts at 1.25 Amps. UL Listed: 9T54. CAN: ICES-3(B)/NMB-3(B) AC Adapter. Made in China(P). I.T.E. Power Supply E132068. Polarity: Positive center on the DC output “barrel” plug.

The DC output barrel connector against a ruler.

Furthermore, the DC connector, the metal barrel part, is about 10 mm long. Plus it has an outer diameter of roughly 4 mm.

The DC  connector, top view, against a ruler.

The size of the positive lead hole at the top of the barrel plug is roughly 2 mm.  Note, that this is a bit smaller than the 21 watt and larger versions of this power supply.

Finally, the AC adapters for the Echo Dot 2 (21 watts) and Echo Dot 3 (15 watts) look similar.  But they ARE NOT interchangeable.  This is due to center conductor size difference.  Also, there’s the DC output voltage on the 21 watt version being 15 volts.  But on THIS wall adapter, it’s 12 volts. So, even if the connectors would fit the other speaker, their voltage specs make them incompatible.

The Echo Dot 3 speaker with its AC power adapter,.

This power adapter, including its cable and connector, weighs approximately 4 ounces.

Other Amazon Echo Dot 3rd Generation Posts

    1. How to Restart Amazon Echo Dot 3rd Generation
    2. How to Factory Reset Amazon Echo Dot 3rd Generation
    3. How to Setup Amazon Echo Dot 3rd Generation

References

    1. Amazon Echo Dot 3rd Generation Official Product Page
    2. Where to Buy an Amazon Echo Dot 3rd Generation
admin

Recent Posts

Changing Wi-Fi Network on Google Home Speaker

You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…

16 mins ago

JBL Charge 3 Controls Explained

The JBL Charge 3 features several controls and lights across its top, as well as…

6 hours ago

Hard Reset Google Home Mini Speaker

Here we give the hard reset Google Home Mini speaker routine.  You might hard reset…

6 hours ago

Hard Reset Google Home Speaker

You can hard reset all of the smart speakers in the Google Home family. These…

7 hours ago

How to Hard Reset Google Home

Covers How to Hard Reset Google Home. Now you can reset this original version of…

7 hours ago

iPod Touch Hard Reset

Gives the iPod Touch hard reset procedure. Now a hard reset restores all settings to…

10 hours ago