Explains the connect 2 JBL Wonderboom 2 procedure, so that each one plays the same audio content from the same source device. In this demo, we use one JBL Wonderboom 2, and one Wonderboom 2 to show how this works. You can indeed mix and match these models, as we do here. But connecting 2 of the same model works the same.
We show the Power buttons on each JBL Wonderboom in the next pictures.
Press and release the Power button on the first one, and await the power-ON sound.
Then, press and release the Power button on the second JBL Wonderboom, and again, wait for it to come on.
In this demo, we’ll first link the JBL Wonderboom 2 with our iPad Air tablet. Now perhaps you’re not sure how to connect your Wonderboom to a Bluetooth source device. If so, then see our How to Pair Just One Wonderboom Speaker post for details.
Next, press the middle (Play / Pause) area of the Wonderboom you just connected with your source device. Hold until the speaker makes a connect sound and the pairing lamp starts fast-flashing. Here, our first speaker is the JBL Wonderboom 1 (the first version of this series). And in the following picture, we show where to press.
Next, press and release the middle area of the second JBL Wonderboom. Here, ours is the second version (Wonderboom 2). And in the next picture, we show where to press.
The speaker then makes a ready-to-connect sound. Also the pairing light just above the center button blinks briefly. Then, once this speaker connects with the first speaker, its pairing lamp glows steadily.
Both JBL Wonderboom units now share a connection. Thus, when you play audio on your source device, you’ll now hear it through both.
Note that each JBL Wonderboom 2 provides stereo sound. Furthermore this holds true even when you have two linked to each other. That is, each speaker provides stereo whether or not it connects to another. Thus it’s not the case that the first JBL Wonderboom 2 plays the left channel and the second plays the right. Both JBL Wonderboom 2 play both channels, in stereo, in fact.
To break the connection between both JBL Wonderboom 2s, simply power down the second one. After that, the first one (the one that you connected with your Bluetooth device) continues playing.
Now powering down the first one will also break the connection between it and the second speaker. Then the second one will stop playing. But this also breaks the link with the source BT device. So powering OFF the first speaker stops BOTH speakers. But the second one will still be ON until you turn it off.
This Honeywell RTH9580WF reset procedure clear all user changed settings in this thermostat. Resetting also…
WD-40 products have adorned our workshop shelves for years. Here, we review the WD-40 Specialist…
WD-40 products have adorned our workshop shelves for years. Here, we review the WD-40 Specialist…
WD-40 products have adorned our workshop shelves for years. Here, we review the WD-40 Specialist…
You might need to reconnect your Honeywell thermostat (t-stat) to the internet, by changing a…
You might need to reconnect your Honeywell smart thermostat (t-stat) to the internet, by changing…