Connect 2 JBL Wonderboom

A Wonderboom 1 and a Wonderboom 2 side by side.

Explains the connect 2 JBL Wonderboom procedure, so that each one plays the same audio content from the same source device. In this demo, we use one JBL Wonderboom 1, and one JBL Wonderboom 2 to show how this works. You can indeed mix and match.

Connect 2 JBL Wonderboom: Step by Step

1. Power Up Both JBL Wonderboom

We show the Power buttons on each of our JBL Wonderboom in the next pictures.

Press and release the Power button on the first one, and await the power-ON sound.

The JBL Wonderboom top view. Showing the dark -Power- button.

Then, press and release the Power button on the second JBL Wonderboom, and again, wait for it to come on.

The Top of the JBL Wonderboom 2. Showing the dark -Power- button.

2. Connect the First JBL Wonderboom with a Phone or Other Bluetooth Device

In this demo, we’ll first link the JBL Wonderboom 1 speaker with our iPad Air tablet. Now perhaps you’re not sure how to connect your JBL Wonderboom to a Bluetooth source device. If so, then see our How to Pair 1 JBL Wonderboom Speaker post for details.

3. Press and Release the Play / Pause Button on the First Speaker to Continue with Connect 2 JBL Wonderboom

Next, press the middle (Play / Pause) area of the JBL Wonderboom you just connected with your BT source device. Hold until the speaker makes a connect sound and the pairing lamp starts fast-flashing. Here, our first speaker is the original JBL Wonderboom (the first version of this series). And in the following picture, we show where to press.

The -Play-Pause- button.

4. Press the Play / Pause Button on the Second JBL Wonderboom

Next, press and release the middle area of the second JBL Wonderboom. Here, ours is the second version (Wonderboom 2). And in the next picture, we show where to press.

The center button.

The speaker then makes a ready-to-connect sound. Also the pairing light just above the center button blinks briefly. Then, once this speaker connects with the first JBL Wonderboom, its pairing lamp glows steadily.

5. Done with Connect 2 JBL Wonderboom !

Both JBL Wonderboom units now share a connection. Thus, when you play audio on your source device, you’ll now hear it through both JBL Wonderboom.

A JBL Wonderboom 1 and a JBL Wonderboom 2 side by side, after we connect these 2 JBL Wonderboom.

Note that each JBL Wonderboom provides stereo sound. Furthermore this holds true even when you have two linked to each other. That is, each speaker provides stereo whether or not it connects to another. Thus it’s not the case that the first JBL Wonderboom plays the left channel and the second plays the right. Both JBL Wonderboom play both channels, in stereo, in fact.

Connect 2 JBL Wonderboom: Breaking that Connection

To break the connection between both JBL Wonderboom, simply power down the second one. After that, the first one (the one that you connected with your Bluetooth device) continues playing.

Now powering down the first one will also break the connection between it and the second speaker. Then the second one will stop playing. But this also breaks the link with the source BT device. So powering OFF the first speaker stops BOTH speakers. But the second one will still be ON until you turn it off.