Explains the connect 2 Ultimate Ears Wonderboom 1 procedure, so that each one plays the same audio content from the same source device. In this demo, we use one Ultimate Ears Wonderboom 1, and one Ultimate Ears Wonderboom 2 to show how this works. You can indeed mix and match.
We show the Power buttons on each of our Ultimate Ears Wonderboom 1 in the next pictures.
Press and release the Power button on the first one, and await the power-ON sound.
Then, press and release the Power button on the second Ultimate Ears Wonderboom 1, and again, wait for it to come on.
In this demo, we’ll first link the first Wonderboom with our iPad Air tablet. Now perhaps you’re not sure how to connect your Ultimate Ears Wonderboom 1 to a Bluetooth source device. If so, then see our How to Pair 1 Ultimate Ears Wonderboom 1 Speaker post for details.
Next, press the middle (Play / Pause) area of the first Wonderboom that you just connected with your BT source device. Hold until the speaker makes a connect sound and the pairing lamp starts fast-flashing. Here, our first speaker is the original Ultimate Ears Wonderboom 1 (the first version of this series). And in the following picture, we show where to press.
Next, press and release the middle area of the second speaker. Here, ours is the second version (Wonderboom 2). And in the next picture, we show where to press.
The speaker then makes a ready-to-connect sound. Also the pairing light just above the center button blinks briefly. Then, once this speaker connects with the first Ultimate Ears Wonderboom 1, its pairing lamp glows steadily.
Both Ultimate Ears Wonderboom 1 units now share a connection. Thus, when you play audio on your source device, you’ll now hear it through both Ultimate Ears Wonderboom 1.
Note that each Ultimate Ears Wonderboom 1 provides stereo sound. Furthermore this holds true even when you have two linked to each other. That is, each speaker provides stereo whether or not it connects to another. Thus it’s not the case that the first Ultimate Ears Wonderboom 1 plays the left channel and the second plays the right. Both Ultimate Ears Wonderboom 1 play both channels, in stereo, in fact.
To break the connection between both Ultimate Ears Wonderboom 1, simply power down the second one. After that, the first one (the one that you connected with your Bluetooth device) continues playing.
Now powering down the first one will also break the connection between it and the second speaker. Then the second one will stop playing. But this also breaks the link with the source BT device. So powering OFF the first speaker stops BOTH speakers. But the second one will still be ON until you turn it off.
Here is our Radio Shack 12-500 Weather Radio Review. Now this radio is one of…
Here we give some methods of Telling That JBL Flip 4 is Charging? Well, this…
We've played PlayStation games with our nieces and nephews for several years. And many of…
The JBL Flip 4 has several buttons and lamps across its top, in two rows. …
We’ve dealt with the problem of electric baseboard heater noise for a decade now in…
Follow this JBL Charge 4 Charging routine, that explains charging the JBL Charge 4 via…