Explains the connect 2 Ultimate Ears Wonderboom procedure, so that each one plays the same audio content from the same source device. In this demo, we use one Ultimate Ears Wonderboom 1, and one Ultimate Ears Wonderboom 2 to show how this works. You can indeed mix and match.
We show the Power buttons on each of our Ultimate Ears Wonderboom in the next pictures.
Press and release the Power button on the first one, and await the power-ON sound.
Then, press and release the Power button on the second Ultimate Ears Wonderboom, and again, wait for it to come on.
In this demo, we’ll first link the Ultimate Ears Wonderboom 1 speaker with our iPad Air tablet. Now perhaps you’re not sure how to connect your Ultimate Ears Wonderboom to a Bluetooth source device. If so, then see our How to Pair 1 Ultimate Ears Wonderboom Speaker post for details.
Next, press the middle (Play / Pause) area of the Ultimate Ears Wonderboom you just connected with your BT source device. Hold until the speaker makes a connect sound and the pairing lamp starts fast-flashing. Here, our first speaker is the original Ultimate Ears Wonderboom (the first version of this series). And in the following picture, we show where to press.
Next, press and release the middle area of the second Ultimate Ears Wonderboom. Here, ours is the second version (Wonderboom 2). And in the next picture, we show where to press.
The speaker then makes a ready-to-connect sound. Also the pairing light just above the center button blinks briefly. Then, once this speaker connects with the first Ultimate Ears Wonderboom, its pairing lamp glows steadily.
Both Ultimate Ears Wonderboom units now share a connection. Thus, when you play audio on your source device, you’ll now hear it through both Ultimate Ears Wonderboom.
Note that each Ultimate Ears Wonderboom provides stereo sound. Furthermore this holds true even when you have two linked to each other. That is, each speaker provides stereo whether or not it connects to another. Thus it’s not the case that the first Ultimate Ears Wonderboom plays the left channel and the second plays the right. Both Ultimate Ears Wonderboom play both channels, in stereo, in fact.
To break the connection between both Ultimate Ears Wonderboom, simply power down the second one. After that, the first one (the one that you connected with your Bluetooth device) continues playing.
Now powering down the first one will also break the connection between it and the second speaker. Then the second one will stop playing. But this also breaks the link with the source BT device. So powering OFF the first speaker stops BOTH speakers. But the second one will still be ON until you turn it off.
Why would you need to know this Find MAC Address on Honeywell Thermostat procedure? It…
Why would you need to know How to Find Honeywell WiFi Thermostat MAC Address? It…
Why would you need to know How to Find Honeywell WiFi Thermostat IP Address? You…
Covers the Remove Permanent Hold on Honeywell Thermostat procedure. Now this indeed begs the question…
How Do You Tell That JBL Flip 3 is Charging? Well, this Bluetooth speaker sports…
Here, we give the Remove Temporary Hold on Honeywell Thermostat procedure. Now this begs the…