This piece gives directions to connect the Logitech Wonderboom 1 and 2 together so that they both play the same audio content from a paired source Bluetooth device. In this example, we use one Logitech Wonderboom 1, and one Wonderboom 2 speaker to show how this works. You can indeed pair two Logitech Wonderboom 1’s, two Wonderboom 2’s, or, as we’re doing here, you can join a Logitech Wonderboom 1 with a Wonderboom 2.
We show the Power buttons on each of our Wonderbooms in the next pictures.
Press and release the Power button on the first one, and await the power-ON sound.
Then, press and release the Power button on the second Wonderboom, and again, wait for it to come on.
In this demo, we’ll first pair the Logitech Wonderboom 1 speaker with our iPad Air tablet. If you’re not sure how to join your Wonderboom to a Bluetooth source device, then see our How to Pair 1 Wonderboom Speaker post for details.
Next, press and hold the middle (Play / Pause) area of the Wonderboom you just paired with your BT source device until the speaker makes a pairing noise and the pairing lamp begins rapid flashing. Here, our first speaker is the original Wonderboom (the first version of this series).
Next, press and release the middle area of the second Wonderboom. In our case, this is the second version of the Wonderboom (Wonderboom 2), and in the next picture, we show where to press on this speaker/
The speaker then makes a pairing sound and the pairing light just above the center button in the last picture, blinks briefly. Then, once this speaker connects with the first Wonderboom, the pairing lamp starts glowing steadily.
The two speakers are now connected together. Thus, when you play audio on your Bluetooth source device, you’ll now hear it through both Logitech Wonderboom 1 and 2 at the same time.
Note that each Wonderboom provides stereo sound, and this holds true even when you have two of them joined to each other. I.e. Each speaker provides stereo whether or not it’s paired to another Wonderboom. Thus it’s not the case that the first Wonderboom plays the left channel and the second plays the right. In fact, both Wonderbooms play both channels, in stereo.
To break the link between the two speakers, simply power down the second one. After that, the first one (the one that you connected with your Bluetooth device) continues playing.
Now powering down the first one will also break the connection between it and the second speaker, and the second speaker will stop playing. But this also breaks the pairing with the source BT device. So powering OFF the first speaker stops BOTH speakers, although the second one will still be powered UP until you turn it off.
If you're a Spotify streaming service subscription holder, you can now listen to your playlists…
Here, we cover Unlink Spotify From Google Home Speaker. You may wish unlink (remove, delete)…
You might reset Alexa Echo Spot and return the settings to their factory default values,…
In this post, we run through how to find the Echo Spot IP address setting,…
You might reset Echo Spot WiFi to fix faulty connection behavior, put it on a…
Here, we detail our Echo Spot firmware update procedure for the Amazon Alexa Echo Spot.…