Adapters

Echo Dot 3 Power Adapter Specs

Here we cover the Echo Dot 3 power adapter specs.  This is the wall plug that comes with the Echo Dot 3 smart speaker.

First,, the US version of this adapter has non folding AC prongs.  It also has a six-foot long non removable cord. Further, it is light weight for the 15 watt power output. It is square yet with modest width and height. This 12-volt supply fits into a standard power strip or wall outlet therefore.  But it blocks no nearby outlets, as we show next.

An Echo Dot 3 smart speaker powering up, showing its AC adapter in a standard wall outlet.

Yet this supply silently outputs that 15 watts of power.  Also, it provides good regulation. This allows this little speaker to play deeper bass, crisp treble, and decent audio volume.

Further, this is not a low-budget adapter. It appears well built.  Also, it runs with little heating, even at higher volumes. And it emits little if any RFI noise. But while not easy to repair, the low cost makes fixing a near pointless exercise.

The prong side of the Echo Dot 3 power adapter: Model # GP92NB.

Amazon Echo Dot 3 Power Adapter Specs

Echo Dot 3rd Gen power supply. Model: GP92NB. LO P/N PA-1150-9ABN. Input: 110-240 volts, 50-60 Hz., 0.5 Amps Max. Output: 12 volts at 1.25 Amps. UL Listed: 9T54. CAN: ICES-3(B)/NMB-3(B) AC Adapter. Made in China(P). I.T.E. Power Supply E132068. Polarity: Positive center on the DC output “barrel” plug.

The DC output barrel connector against a ruler.

Furthermore, the DC connector, the metal barrel part, is about 10 mm long. Plus it has an outer diameter of roughly 4 mm.

The DC  connector, top view, against a ruler.

The size of the positive lead hole at the top of the barrel plug is roughly 2 mm.  Note, that this is a bit smaller than the 21 watt and larger versions of this power supply.

Finally, the AC adapters for the Echo Dot 2 (21 watts) and Echo Dot 3 (15 watts) look similar.  But they ARE NOT interchangeable.  This is due to center conductor size difference.  Also, there’s the DC output voltage on the 21 watt version being 15 volts.  But on THIS wall adapter, it’s 12 volts. So, even if the connectors would fit the other speaker, their voltage specs make them incompatible.

The Echo Dot 3 speaker with its AC power adapter,.

This power adapter, including its cable and connector, weighs approximately 4 ounces.

Other Echo Dot 3 Posts

    1. Echo Dot 3 Buttons Guide
    2. Factory Reset Directions
    3. Setup Instructions

References

    1. Echo Dot 3 Official Product Page
    2. Where to Buy an Echo Dot 3
admin

Recent Posts

Amazon Echo Dot 3rd Generation Power Cable Specs

Here we cover the Amazon Echo Dot 3rd generation power cable specs.  This is the…

57 mins ago

Sony SRS XB32 Speaker Charging Indicator

The Sony SRS XB32 speaker charging indicator is a small LED light in the back…

1 hour ago

Echo Dot 3rd Generation Power Adapter Specs

Here we cover the Echo Dot 3rd generation power adapter specs.  This is the wall…

1 hour ago

Set Echo Speaker to Pairing Mode

You must know how to set the Echo speaker to pairing mode to connect it…

3 hours ago

JBL Go 2 Speaker Watts

The JBL Go 2 speaker by Harman Kardon is a low power, hand-held style unit…

17 hours ago

Honeywell Wireless Thermostat Connection Failure

Shows how to fix Honeywell wireless thermostat connection failure issues. You might see these on…

17 hours ago