Gives the Factory Default Reset Honeywell WiFi Thermostat RTH8580WF procedure. Now this resetting clears out all user set settings. It erases the WiFi network and restores the t-stat to factory default condition.
We suggest resetting when working smart thermostat problems. This rules out the chance that bad settings are causing the issue. Keep in mind though, that after a reset, the RTH8580WF forgets any program settings. So you must enter your home WiFi network info again. Also, this clears any custom schedules. The t-stat returns to the useful, but not always desirable, daily heating and cooling schedules. So again, you may need to adjust them again to match your needs.
Before restoring to factory default settings, round up your thermostat’s manual hat shipped with it. Or, you can find it online at Honeywell’s web site.
Write down the current daily program schedule currently stored in the thermostat if you’ve changed it from the default schedule.
Run down through the Functions and Settings pages (numbered parameters list). Jot down any settings that you’ve changed that tailor the RTH8580WF to your specific heating / cooling system. These might include filter-change reminder settings, WiFi network info, system type, t-stat name, et al.
Once you write down any custom settings, you can now safely return RTH8580WF to factory default state. Do that as follows.
It’s on the touchscreen, as shown above at the left side of the screen.
Find that square near the bottom of the touchscreen, third square from the left. Keep pressing until the Configuration Parameters screen appears.
Press the first set of UP-DOWN arrows, to advance to the Restore Original Settings option (parameter 0710).
The screen should look as follows before moving on to the next step.
To do that, tap the UP / DOWN arrows at the far right of the touchscreen. Tap until the value of setting 0710 is a 1.
Taking the next step erases all custom settings. So do not proceed until you feel that you can set it up the right way. Get help from a climate control tech if you’re not sure. Resetting may disable some HVAC features. So make sure you know how to adjust these settings correctly for your system before resetting.
Again, record the settings changed when you first installed the thermostat. Then press the DONE button in the lower left corner of the screen, shown in the last picture.
This starts the factory default reset.
The screen goes black a couple of times.
Then after several seconds, it prompts you to enter the correct date.
Use the UP and DOWN arrows beside the year, month, and day to adjust these to their correct settings.
When the correct date appears, press the DONE button.
Touch the UP / DOWN arrow buttons. Find these beside the time display. Tap them until the right time appears.
The RTH8580WF then shows the main status and menu screen as seen next. The default system state is OFF, and the default 7-day program is now in effect.
From here, you can set the temperature, enter your WiFi info (described here), and set any custom settings you need.
This is our Honeywell RLV310A Line Voltage Baseboard Heat Thermostat Review. Now we purchased two…
This is our Review of Honeywell RLV310A Line Voltage Thermostat. Now we purchased two of…
In this post, we show how to calibrate Honeywell thermostat, model RTH9580WF. Now why would…
The JBL Xtreme (Extreme) comes with an AC charger cord, discussed all about it here. …
This post demos How to Pair Alexa With Ultimate Ears Wonderboom 2. We use an…
This post demos How to Pair Alexa With UE Wonderboom 2. We use an Echo…