Change how loud the bass is on the Sony SRS XE200, by turning on and off its bass boost mode. When ON, this mode makes the speaker vibrate much more. Plus it adds a low rumble quality to the playing program. So, for you boom lovers, here’s how to bass boost the Sony SRS XE200 speaker.
You can control bass boost on this speaker in a few ways.
We’ll cover all of these options below.
By default, this speaker has bass boost mode ON when new or after a reset. So whenever you run this speaker, then the STAMINA light is dark. This means that bass boost is active.
When the 200 is running, and this lamp is OFF, then bass boost mode is in effect.
Now when active, bass boost also adds a bit of treble to the audio output.
Turn bass boost mode OFF by pressing the BATT button. This deactivates bass boost and switches the speaker into STAMINA mode. The STAMINA lamp then lights up white.
Note that if the STAMINA lamp glows, then bass boost is inactive. So to enable bass boost in that case, press and hold the BATT button until the STAMINA lamp goes dark. Bass boost resumes at that time.
In addition to by way of the BATT button, you can also control bass boosting in Sony’s Music Center app.
So first, download and install this app on your source Bluetooth device (phone, tablet, computer, or media player). We did this on a test iPad Air.
We did this as we show next.
Upon startup, Music Center looks for any compatible Sony products. And since the XE200 indeed works with this app, the app does indeed find the speaker. Then it displays the Home page for it as we see next.
Then, scroll the screen down to the Settings item at the bottom of the options list.
Next, tap Settings, and you’ll get the Settings screen, as we see next.
Tap the Sound option, pointed out in the last screenshot. You then get the Sound page, as we see next.
Tap the BASS / MID / TRE option on the Sound page. We highlight it in the last picture.
Touching this option brings up a three band graphic equalizer page. Now by default, this EQ is on FLAT for all frequency bands.
But you can get maximum bass boost by moving these slider controls as follows. For example, lower the other two frequency bands to minimum. But raise the BASS one to maximum.
When set this way, you get the highest amount of bass that the XE200 speaker is capable of producing. But be careful !
The drivers really thump when bass boost is active. So use caution in how loudly you play the 200 with bass boost ON. This avoids damage to the speaker drivers. If the bass is crackling, tapping, or distorting, turn it down or readjust the EQ !
So we have now shown how to get the most boosted bass from your Sony SRS XE200 stereo column speaker. Thus, please enjoy !
Here, we list JBL Flip 4 speaker specs specifications. To summarize, these cover the speaker's…
This post shows how to connect Google Home Mini to Bluetooth speakers. Here, we show…
Gives the JBL Flip 4 firmware update procedure. This routine can take up to thirty…
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…