This post shows how to connect a Sony XE300 portable column Bluetooth speaker to an iPhone smart phone. Doing so gives you a bigger, and notably better sound when you stream music from the iPhone to speakers like this one.
With the XE300 switched OFF (power button is dark), run through this routine to connect it to your iPhone mobile device..
Firstly, press and release the side button (right edge of the phone), swipe up from the bottom or hit the Home button, and enter your passcode or Face Id to launch the Home screen.
Next, flip through the Home screen pages until you find the Settings app. We found ours on the second page of this screen, as we see next.
Thirdly, tap the Settings app icon.
The smart device then shows the first page of its settings, as shown in the next step.
Tap the Bluetooth item on the Settings page.
Then you get the Bluetooth Settings screen, as we show next.
Note that our Bluetooth is running here. But since our test Sony XE300 is currently shut OFF (is not in Bluetooth pairing mode), it does not show up in the BT devices list. Also, we don’t see it since we’ve never paired this speaker with this iPhone before.
Turn on the XE 300 by pressing its Power button. E.g. See this, pointed at by the green arrow, in the next picture.
The speaker then boots up, and the green Power lamp comes on, as we see in the next picture.
Also, the Pairing lamp, just below the Power light, may blink in some pattern to show that the speaker is ready to respond to a Bluetooth pairing request. Or it may glow solidly, meaning that the speaker paired with some nearby device upon startup. In either case though, continue on with this routine.
If this lamp flashes evenly, then it’s passively waiting for a Bluetooth connection request to come in. But if it blinks in pulse-pulse-pause, pulse-pulse-pause pattern, then the speaker is broadcasting its connection information over Bluetooth so other devices can find and link it. I.e. The speaker is already in pairing mode in this case.
Moreover, since our test iPhone does not know about this speaker since we’ve never connected the two together before, this test speaker will not pair with it automatically.
Now, to see this speaker on your iPhone, place it into Bluetooth pairing mode if it’s not in that mode by now. To do that, press the Pairing button.
Hold it in until the XE300 announces, “Bluetooth pairing,” in a female’s voice, and also, the Bluetooth Pairing lamp starts its pulsing blue in the groups of two.
See the screen shot next. We found our speaker, as shown next.
Tap the listed speaker in the DEVICES list.
The iPhone then pairs with the test speaker here, and the speaker plays a ding-dong sound and the female voice announces, “Bluetooth connected.”
I.e. The iPhone’s Bluetooth Settings screen might then change to look something like the following. Note the now-paired Sony XE300 entry, as we point out with the green arrow next.
At last, we have now successfully connected the XE300 test speaker with a popular iPhone.
Here, we give the typical Ultimate Ears Wonderboom 2 Speaker charge time. Now you charge…
Here, we give the typical UE Wonderboom 2 Speaker Charge Time. Now you charge this…
Here, we give the typical Logitech Wonderboom 2 Speaker Charge Time. Now you charge this…
Here, we give the typical JBL Wonderboom 2 Speaker Charge Time. Now you charge this…
Here, we give the typical Wonderboom 2 Speaker charge time. Now you charge this speaker…
Here, we give the Reset Ultimate Ears Wonderboom Speaker Instructions. This returns the unit to…