How to Connect to Sony SRS XE200

The Pairing button on the Sony SRS XE200 speaker.

This post shows how to connect to the Sony SRS XE200 portable column speaker by way of Bluetooth from common wireless devices. E.g. These include the Apple line of device like the iPhone, iPod Touch, and iPad. This routine also works for Android base devices too, such as Samsung and LG phones, and Amazon Fire tablets.

How to Connect to Sony SRS XE200, Step by Step

With your SRS XE200 powered OFF (power lamp is dark), run through these directions to connect your source BT mobile device to this speaker. We have an iPad Air computer on which to run this demo.

1. Go to the Home Screen on your Source Device

Firstly, press the Home button to reveal the smart device’s Home screen.

2. Find the Settings App

We found ours on the second page of the Home screen, as shown next.

iOS Home Screen with Settings App Highlighted

3. Bring up the Settings App

Thirdly, touch the Settings app icon.

The smart device then shows the first page of its settings, as shown in the next step.

4. Go to the Bluetooth Settings Page to Continue with How to Connect to Sony SRS XE200

Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is enabled here. But since our XE 200 is currently shut OFF (is not in Bluetooth discovery mode), it does not show up in the Bluetooth devices list. Also, we don’t see it since we’ve never connected to this speaker with this particular mobile device before.

iPadOS -Bluetooth Settings- page showing nothing discovered

5. Turn On the XE200

Power up the speaker by quickly pressing its Power button. See this, pointed at by the green arrow, in the next picture.

The Power button on the Sony SRS XE200 speaker.

The unit then powers up, and its Power button glows white, as we in the next picture.

The green glowing power lamp.

But since our tablet does not know about this speaker, it does not connect to the SRS XE200 automatically.

6. Put the XE200 in Discovery Mode

Now, to see your XE200 on your device, place it into Bluetooth discovery / pairing mode. So to accomplish that, press and hold the Pairing button, and release when you hear the speaker announces, “Bluetooth pairing,” in a lady’s voice. Find the button in the buttons panel, second one down from the top, just below the Power button.

In addition to the voice announcement, the Bluetooth Status lamp begins flashing blue in the pulse-pulse-pause-pulse-pulse-pause pattern, as we see next.

The blue glowing Bluetooth Pairing light on the Sony SRS XE200 speaker.

7. Find the Speaker on your Mobile Device to Continue with How to Connect to Sony SRS XE200

See the screen shot next. We found our XE200 in the Other Devices list, as pointed at by the green arrow.

The Sony SRS XE200 speaker showing as discovered on iPadOS.

8. Now Connect to the XE200

Tap the listed speaker in the Other Devices list.

Your source device then connects with the Bluetooth speaker.

E.g. The the mobile device’s Bluetooth Settings screen then changes to look something like the following. Note the now-connected SRS XE200 entry, as pointed at by the green arrows in the next screenshot.

The speaker showing as Connected on iPadOS.