Bluetooth Speakers

How to Get Ultimate Ears Wonderboom In Pairing Mode

To link the Ultimate Ears Wonderboom with a Bluetooth source device for the first time, or to reset the connection information on that device, you must know how to get it in this mode.  This makes the Ultimate Ears Wonderboom call out its Bluetooth name and current linkage data on the BT airwaves.  So in this post, we show how to get Ultimate Ears Wonderboom in pairing mode, so you can connect it to phones, tablets, computers, and smart speakers.

How to Get Ultimate Ears Wonderboom in Pairing Mode: Step by Step

1. Turn On the Ultimate Ears Wonderboom

First, turn on the Ultimate Ears Wonderboom by pressing its  Power  button once.

See this button in the next picture.

The Ultimate Ears Wonderboom top view. Showing the dark -Power- button.

The unit then powers ON. Further, the lamp on the top panel glows steady white, depending on Ultimate Ears Wonderboom’s current battery charge state. This light may blink red if your battery is close to dead.  But for this exercise, we assume a full battery.

The glowing -Power- button on the Ultimate Ears Wonderboom.

Yet whether the speaker is paired or not, you can start pairing mode as follows.

2. Press the Pairing Mode Button and Release when the Pairing Lamp Starts Quickly Flashing

Now, to be able to find your speaker on your source Bluetooth device, place it into pairing mode. For that, press and hold in the Pairing button, until the speaker makes rising pitch sound.

The -Pairing Mode- button.

When you press this button, the speaker makes a rising plunka-dunka-dunk dunk pairing sound. Plus, the top panel Pairing Mode lamp inside the Pairing Mode button starts quickly blinking white.

3. Done with How to Get Ultimate Ears Wonderboom in Pairing Mode

Next, while the Pairing Mode light is blinking, you should see your speaker on any in-range phone, computer, tablet, or smart speaker, as shown next.

iOS Bluetooth Settings page. Showing the Ultimate Ears Wonderboom as discovered in pairing mode.

Other Ultimate Ears Wonderboom Posts

    1. How to Turn OFF
    2. How to Turn ON
    3. Pair 2 Speakers Together
    4. Setup Instructions
    5. How to Make Discoverable

References

    1. Official Ultimate Ears Wonderboom Support Page
    2. Where to Buy the Ultimate Ears Wonderboom
admin

Recent Posts

How to Get UE Wonderboom In Pairing Mode

To link the UE Wonderboom with a Bluetooth source device for the first time, or…

5 mins ago

How to Get Logitech Wonderboom In Pairing Mode

To link the Logitech Wonderboom with a Bluetooth source device for the first time, or…

3 mins ago

How to Get JBL Wonderboom In Pairing Mode

To link the JBL Wonderboom with a Bluetooth source device for the first time, or…

9 seconds ago

How to Get Wonderboom In Pairing Mode

To link the Wonderboom with a Bluetooth source device for the first time, or to…

13 mins ago

UE Wonderboom 2 Bluetooth Speaker Pairing Mode

To pair your UE Wonderboom 2 Bluetooth Speaker with a BT source device for the…

34 mins ago

Logitech Wonderboom 2 Bluetooth Speaker Pairing Mode

To pair your Logitech Wonderboom 2 Bluetooth Speaker with a BT source device for the…

32 mins ago