How to Pair Sony XB 01

The glowing Sony SRS XB01 speaker Status light.

This post shows how to pair the Sony XB 01 Extra Bass personal speaker with common portable devices. E.g. These include the iPhone, iPod Touch, and the iPad line of Apple phones, media players, and tablets.

How to Pair Sony XB 01

With your XB 01 powered OFF (power button is dark), run through these directions to pair it to your source BT mobile device. We’re using an iPad Air tablet in this demo.

1. Go to the Home Screen on your Source Device

Firstly, press the Home button to reveal the smart device’s Home screen.

2. Find the Settings App

We found ours on the second page of the Home screen, as shown next.

iOS Home Screen with Settings App Highlighted

3. Bring up the Settings App

Thirdly, touch the Settings app icon.

The smart device then shows the first page of its settings, as shown in the next step.

4. Go to the Bluetooth Settings Page to Continue with How to Pair Sony XB 01

Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is enabled here. But since our XB 01 is currently shut OFF (is not in Bluetooth discovery mode), it does not show up in the Bluetooth devices list. Also, we don’t see it since we’ve never paired this speaker with this mobile device before.

iPadOS -Bluetooth Settings- page showing nothing discovered

5. Turn On your XB 01

Turn on the XB 01 by quickly pressing and releasing its Power-Pairing button. See this, pointed at by the yellow arrow in the next picture.

The Sony XB 01 -Power- button.

The speaker then powers up, and its status lamp glows or blinks blue, as we see in the next picture.

The glowing -Status- light.

But since the demo iPad does not know about this speaker, the XB 01 will not pair with it automatically.

6. Put the Speaker into Discovery Mode

Now, to see the XB 01 on your device, place it into Bluetooth discovery / pairing mode. To do that, press and hold in the Power-Pairing button, and release when the speaker plays two high beep tones. Usually takes one to two seconds to enter pairing mode. Find the Power-Pairing button as seen above.

Also, when you hear the beeps, the Bluetooth Status lamp begins flashing in rapid blue pulses.

7. Find the Speaker on your Mobile Device to Continue with How to Pair Sony XB 01

See the screen shot next. We found our XB 01, as pointed at by the yellow arrow.

iPadOS -Bluetooth Settings- page showing a Sony XB 01 as Discovered but not Connected.

8. Pair with your Speaker

Tap the listed speaker in the discovered devices list.

Your mobile device then pairs with the XB 01.

E.g. The the mobile device’s Bluetooth Settings screen might then change to look something like the following. Note the now-connected XB 01 entry, as pointed at by the green arrows in the next screenshot.

iPadOS -Bluetooth Settings- page, showing the Sony XB 01 as Connected.