How to Reset Sony SRS XB01

Show you how to reset your Sony SRS XB01 tiny egg-shaped speaker to its default settings. Resetting restores the XB01 to factory default state. Plus, resetting erases any earlier paired BT devices from memory. Clearing these halts this speaker from pairing to any nearby Bluetooth devices. Also, you might reset this speaker to get it ready for sale or re-gifting, or to stop it from pairing with devices you no longer wish it to link with.

How to Reset Sony SRS XB01, Step by Step

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

 

Find the Power button, as shown in the last picture above.

Then, the status light comes on, as shown next.  This light we find on upper left corner of the front grill.

The speaker might make a ding-dong beep sound when it powers up, if it pairs with a nearby Bluetooth device.  If it does not connect, then it makes no sound when booting. But whether it pairs or not, this reset routine works the same way, as follows.

2. Press and Hold the Volume DOWN , Volume UP, and Power Buttons at the Same Time

Find these buttons as shown next.  All three of them we find on the top of the speaker, near the front edge, as called out in the next picture.

The XB01 then enters reset mode after a a couple seconds delay.

Then the speaker powers OFF, and the status lamp goes dark, as shown next. Note that on this speaker, there is no power-down sound.

3. Check that your Sony SRS XB01 Did Indeed Reset

Next, power on the XB01 again, as described in step 1 above.

Note that after a reset, this speaker comes up in pairing mode. The Status lamp blinks blue rapidly to tell you this.  This is a signal for you to look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with How to Reset Sony SRS XB01 !

The reset is now finished. So you may now sell or gift the unit, or pair it again with your usual Bluetooth devices.

Note that after a reset, the speaker no longer automatically connects with any previously paired Bluetooth device. Thus, to restore this auto pairing, you manually pair the XB01 with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re in range of one another, pairing automatically occurs once more.

Related Posts to How to Reset Sony SRS XB01

1. 1. How to Reset Sony SRS X11 Personal BT Speaker
   2. How to Reset Sony SRS XB23 Bluetooth Speaker
   3. Sony SRS XB41 Sony Bluetooth Speaker How to Reset
   4. How to Reset Sony SRS XB33 Portable Speaker
   5. Sony SRS XB22 Portable Speaker How to Reset

Other Posts About the Sony SRS XB01

1. 1. How to Check Sony SRS XB01 Battery Life
   2. Sony SRS XB01 Firmware Update Instructions
   3. How to Connect to Sony SRS XB01 Speaker
   4. How to Connect Sony SRS XB01 to Alexa
   5. Sony XB01 Watts Output

References for How to Reset the Sony SRS XB01

1. 1. Sony SRS XB01 Wireless Speakers Support Page at Sony.com

Revision History

• • 2021-09-24: First published.