Front view of the Sony SRS XB22 speaker with its light bars glowing.

How to Reset Sony SRS XB22

Show you how to reset your Sony SRS XB22 portable Extra Bass speaker to its default settings.  Resetting restores the 22 to default state. Plus, resetting erases any earlier paired Bluetooth devices from its memory. Purging these stops this speaker from pairing to any close Bluetooth devices. Also, you might reset to get it ready for sale or re-gifting, or to stop it from linking wirelessly with devices you no longer want it to sync with.

How to Reset the Sony SRS XB22, Step by Step

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

Picture of the -Power- button on the Sony SRS XB22 speaker. How to Reset Sony SRS XB22.
Sony SRS XB22 speaker -Power- button.

Find the Power button, as shown in the last picture above.

Then, the status light comes on, as shown next.

Picture of the glowing -Power- lamp on the Sony SRS XB22 speaker.
Sony SRS XB22 -Power- lamp glowing.

The speaker may make a ding-dong tone sound when it powers up, should it connect to a nearby device. Or it may stay quiet if it does not.  But whether the unit pairs or not though, this reset routine works the same way, as follows.

2. Press and Hold the Power and Volume DOWN Buttons Together

Find these buttons as shown next.  They are both on the top button panel, as we point out in the next picture.

The -Power- and -Volume DOWN- buttons.
The -Power- and -Volume DOWN- buttons.

The XB22 then enters reset mode.

Then after a brief pause, the speaker powers OFF, and the status lamp goes dark, as shown next. Note that on the SRS XB22, there is no leaving-the-air sound.

The dark -Power- light.
Sony SRS XB22 -Power- lamp dark.

3. Check that your Sony SRS XB22 Did Indeed Reset

Next, turn on the unit again, as detailed in step 1 above.

Note that after reset, the XB22 comes up in discovery mode. The Pairing Mode lamp rapidly blinks blue to let you know this.

The glowing -Bluetooth Status- light.
The -Bluetooth Status- lamp glowing.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with How to Reset Sony SRS XB22 !

The reset is now finished. So you may now sell or gift the 22 XB speaker, or pair it again with your favorite Bluetooth devices.

After a reset, the XB22 no longer automatically joins with any previously paired Bluetooth device. Thus, to resume auto pairing, you manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re near each other, pairing automatically take place once again.

Related Posts to How to Reset Sony SRS XB22

    1. How to Reset Sony SRS XB21 Portable Speaker
    2. Sony SRS XB43 Wireless Speaker How to Reset
    3. How to Reset Sony Bluetooth Speaker
    4. Resetting the Sony SRS XB13 Extra Bass Speaker
    5. How to Reset Sony SRS XB10 Portable Speaker

Other Posts About the Sony SRS XB22 

    1. How to Check Sony SRS XB22 Battery Life
    2. How to Make Sony SRS XB22 Discoverable
    3. Sony SRS XB22 Battery Indicator
    4. How to Turn Off Lights on Sony SRS XB22 Speaker
    5. How to Pair Sony SRS XB22 Bluetooth Speaker

References for How to Reset Sony SRS XB22

    1. Sony SRS XB22 Bluetooth Speaker Product Page at

Revision History

    • 2021-09-23: First published.