How to tell if Sony XB01 personal Bluetooth speaker is charging? This little yet extra bass speaker has an orange LED light on the front panel, near the top right corner of the unit, as shown in the following picture. This CHARGE light flashes orange when the battery is nearly dead. So it tells battery level (to a degree). When the speaker is not on the charge and this lamp blinks, it means to CHARGE the speaker because the battery will soon die. But also, to see if the XB01 is charging, check out this lamp as well. We explain how to interpret its signals next.
Of course, you can know for sure that the speaker is NOT charging with no power cord connected to it.
When the speaker is OFF, you can tell if the Sony XB01 is charging if this light glows steady orange. This continuous glow occurs while charging, when the speaker is either ON, paired, or, OFF. When no charger is present, this light blinks when the battery has about run all out of power.
If the CHARGE lamp flashes when the power cord is connected, then the speaker is likely NOT charging. So you should check that your USB cable, adapter charger, and power source are in working order. Try a new adapter or a known good wire. You want this light glowing solid to know for sure that the XB01 is charging.
Additionally, the button panel on the top may warm slightly as the speaker charges. Moreover, most charger adapters you run it with will also heat a little. This heating is a great sign to tell if the speaker is indeed charging.
As charging advances toward finish, the CHARGE LED continues glowing. But unlike some of the higher grade wireless speakers, the XB01 gives no reading of just how far along its recharging is, just that the recharging is still in progress.
The battery charge cycle is finished when the CHARGE LED goes dark.
Even with the charger cord still supplying power, and when the XB01 is OFF or ON, the CHARGE lamp stops glowing when the internal battery is full. We see this in the last picture above. The speaker indeed no longer recharges when the battery reaches full charge condition and this light shuts off.
With the USB cable disconnected, we cannot know just by reading the CHARGE or Status LEDs, just how much the SRS XB01 actually recharged, only that it did charge some. It probably did charge all the way though, as long as we waited until the CHARGE lamp stopped glowing before disconnecting the charger. Note that if this lamp does not flash when you next turn on the speaker, then the battery likely did charge.
Gives the Reset iPod Video Player procedure for this Apple 5th gen player. Restoring most…
You may experience WiFi connection errors when booting your Google Home Mini. Or, your speaker…
You may experience WiFi connection errors when booting your Google Home Mini. Or, your speaker…
The USB power adapter shipped with the Google Home Mini smart speaker is a typical…
Gives details about the Google Home Mini Power Cord that works well with this speaker.…
Here, we show How to Factory Reset Echo Dot 3rd Gen Speaker, to set it…