This speaker comes equipped with a set of party LED lights that, by default, blink, change color, and pulsate to the beat of whatever you play on the speaker. But now and then, you may not wish to have a party atmosphere in your room, like when you want to play the speaker while drifting off to sleep or during the day in a bright area, where you can’t see the lights anyhow. So we show here how to turn off the Sony XG300 lights for just these circumstances.
To turn off the party lights, you need to find the LIGHT button. We find this control on the back of the speaker, outside and just above the ports compartment, as we see in the next picture.
There are two buttons inside the ports door. The LIGHT button is the last button on the right.
The lights shut off immediately upon pressing the LIGHT button.
These lamps, which light the left and right passive radiators of the unit, are set to display their party patterns by default.
They work either when fresh out of the box, or after a factory reset. You can turn them off as follows…
Then when you want to turn them back ON, simply repeat what you did above. I.e. Press and release the LIGHT button. Then the party lamps will go back to their usual pulsing and fading color changes.
Power up the speaker and pair it with your mobile device.
The Home page for the XG300 comes up.
Next, swipe up until you see the Settings item at the bottom of the screen.
Then touch that item. This brings up the Settings page for the 300.
Next, find the Illumination option as we see in the last picture.
Doing so brings up the Illumination page for our test speaker.
Note that the Lighting Mode option is set to DELIGHTFUL, which is the name of one of numerous light show patterns the 300 is capable of displaying.
Tapping that link brings up the Lighting Mode screen for the XG300, as we see next.
Next, find the LIGHT OFF option, near the top of the list of lighting patterns.
Doing this moves the brown check mark from the DELIGHTFUL option to the LIGHT OFF option, as we see in the next shot.
Find the Done item near the top right corner of the screen.
Doing this sends the command to turn the party lights OFF to the speaker, and the lights should immediately go dark.
Then the app takes you back to the Illumination page.
Note now that the Lighting Mode option value is now set to LIGHT OFF.
You now know how to turn off the party lights on this speaker using either the Light button on the speaker itself, or doing it in the Sony Music Center app. Thus, you can liven up your party when you’re having one, and save battery power when you’re not.
Explains the Wonderboom connect 2 speakers routine, so that they both play the same audio…
This post shows how to sync the Wonderboom with common Bluetooth devices. So first, start…
This post shows how to connect Wonderboom with common Bluetooth devices. So first, start with…
The Honeywell thermostat waiting for equipment condition sometimes happens on these smart thermostats. So these…
When your JBL Boombox won't turn ON, this has several possible causes. Either it is…
You can adjust the bass of the JBL Flip 5 speaker by turning ON and…