How to Turn Off Sony XB10

The Sony SRS XB10 portable speaker, showing the -Power- button.

We explain how to turn off the Sony XB10 portable BT speaker here. Now most speakers have a Power button that Sony prominently places on the unit so it’s easy to locate. Indeed, this speaker is no exception to this pattern, as we find its Power button near the bottom in the button panel. See this next.

The Sony XB10 portable speaker, showing the -Power- button.

There’s also a status lamp, just to the left of the Power button, that glows as long as the speaker is ON, but goes dark when you turn off the speaker. E.g. We point out this lamp in the next picture.

The Extra Bass speaker, showing this unit powered ON, and the Status lamp glowing.

This lamp glows when the speaker is ON, as seen above.

And when you turn off the XB10, this lamp goes OFF, as we see next.

The speaker, powered OFF, with the status lamp dark.

How to Turn Off the Sony XB10

To power down this speaker, press the Power button. Then release after a quarter second or so. Also, you needn’t hold it in for too long for the unit to see your press and then shut itself down.

When the speaker goes off, all lamps on the unit stop glowing, except for possibly the orange CHARGE lamp. See this in the next picture.

The speaker with its orange charging light glowing.

This light continues glowing when the speaker is recharging, no matter whether the speaker itself is ON or OFF. Note that the CHARGE lamp does not indicate speaker power status. But it will stop glowing when the battery reaches full charge or you disconnect the charger from the speaker.

Moreover, this speaker makes no sound when it powers OFF, although if it is playing something, this sound will stop right away.

But if pressing the Power button does not turn off the speaker, you can try resetting it by following our Sony XB10 Reset Instructions.

And if that doesn’t work, you can disconnect the speaker from your charger, and let it run dead. Then it will certainly shut down. At that point, and hopefully, when you recharge it, the Power button will once again work correctly. But if not, the speaker may be defective, and so you might just have to replace it.