JBL Boombox 2 Charging Indicator

The battery gauge on the JBL Boombox 2 speaker, showing full charge, all of the bar glows.

This Bluetooth speaker has a group of LEDs behind a translucent white bar in its front lower area. This Charging Indicator bar on the JBL Boombox 2 displays battery status and shows whether it’s draining or charging.

How to Read the JBL Boombox 2 Charging Indicator

1. The Charging Indicator is Entirely Dark

When you power down the Boombox 2 with no charger, no lamps light up. This bar also shows as dark when a charger IS co but the battery finished charging to full. The Charging Indicator is just to the left of where the USB-C charging cable plugs into the speaker.

The dark Charging Indicator on the JBL Boombox 2.

2. JBL Boombox 2 Charging Indicator Shows Battery Recharging Progress

There are five tiny LED lamps inside the speaker, that illuminate the Charging Indicator bar in various degrees. These light in succession as the speaker charging fills the battery. The Boombox 2 is charging when part of the bar blinks white. Then as charging continues, more of it lights up, and the flashing part moves upward.

Note though, that you may see the bottom most part of the indicator blink red. This does not mean that charging is proceeding. Instead, it means that the speaker battery is critically low and that you should recharge the speaker immediately.

The blinking red Charging Indicator.

It only flashes red like this when the battery is nearly dead and AC power is not yet present. But when you connect the charger, this red flashing turns to blinking white. Remember though, that this light never flashes red while charging is working correctly.

3. When All Lamps Light Up Solid, Charging is Complete

As charging continues, more of the battery meter lights up solid. That is, the flashing LED moves further up the bar until that blinking reaches the top.

Battery charging is complete when all but the very last little segment of the indicator lights solid. That last part continues to blink for several minutes. Again, you know that charging is occurring if one of the battery charge level lamps is flashing white.

Note that during the charge cycle, part of the indicator is dark (top most portion). This lets you know about how much more the battery must charge before reaching fullness.

The battery recharge cycle finishes when the entire battery status gauge goes dark, as we see above. Thus, the battery is no longer charging when all lamps are OFF. Even with the AC charger still connected, no part of the indicator glows when the battery is full.

4. The JBL Boombox 2 Charging Indicator Also a Battery Charge Remaining Meter

When unplugged from the charger, what was the battery charging indicator becomes the battery charge left indicator. The more lights lit, the fuller the battery. The fewer glowing lamps, the less speaker run time left. These lamps show battery status for a brief time. You can see that right after you power up the speaker. Or it also appears whenever you press the Volume UP or Volume DOWN buttons. To save power, these lamps go dark after some seconds.

The Charging Indicator shows full charge when all of the bar glows.

The last picture shows the speaker running. The entire battery meter bar glows here. This means that the battery is between eighty and one hundred percent full.

JBL Boombox 2 Charging Indicator: Reading It in the Portable App

You can also see the Charging Indicator in the JBL Portable app. Just pair the 3 with this device and bring up the app.

The JBL Portable app icon on iPadOS.

Then, once the app detects the speaker, it displays the speaker’s home page as we see next.

The JBL Boombox 2 Charging Indicator as displayed in the Portable app.

The indicator we point out with the dark blue arrow. It shows how full the battery in the speaker is. The more of that bar that is green in color, the fuller the battery.