Change the bass response of the JBL Charge 3, by turning on and off its bass mode (EBM). In fact, when activated, EBM makes the passive bass radiators vibrate a lot more. This also adds a rumble quality to the playing program. But you may wish to switch OFF EBM when playing the speaker loudly, say at an outdoor party. This helps cut bass distortion. Plus, less bass means longer playing time before the battery runs dead.
First, by default, this speaker has bass mode (BM) turned on, after a reset. This adds a bit of extra treble and lots more bass to the audio. While BM often runs the battery out of power faster, the better sound may be well worth it.
You can turn BM off by pressing the Volume Down (-) and Bluetooth buttons. Then hold them in for about ten seconds, until some of the battery gauge lights come on.
Find the buttons on the top of the speaker.
Finally, to turn JBL Charge 3 bass mode back on again, press the Volume Down and Bluetooth buttons. Then hold them in until the battery gauge lights up again. And finally, release the buttons. When the battery gauge lights, BM resumes once more. Note that you can also reset the speaker to turn on BM again, although this creates more effort, Why? Because if you do then, then you must re pair your devices to the Charge 3.
Gives a safe routine to defrost a freezer fast with a heat gun. now a…
You can charge the JBL Clip 3 conveniently via the hidden USB charge port. Here,…
The Charge 3 JBL comes with an AC charger adapter, whose specs , type, and…
We review the Panasonic model NN-SN778 here. Now it comes packed with high power output. …
The common Honeywell thermostat offers several ways (at least) to cut your heating and cooling…
To check battery on the JBL Go 3 speaker, the status lamp tells about the…