JBL Charge 5 BT speaker, front left view.
Unfortunately, the usual way to switch LFM does not work on the JBL Charge 5. Hopefully, JBL will re add this feature in a later version of the firmware. But if this did work, it might work as it has on other JBL Charge speakers. Now when ON, this mode makes the passive bass radiators vibrate noticeably more. Furthermore, LFM adds a decidedly “thumpy” aspect to the content playing. And this would make this speaker sound much bigger than it really is.
First off, by default, this BT speaker has this extra bass mode turned on. Moreover, if this toggling actually worked, this would also add more treble and lots more bass.
Someday we hope that you’ll be able to turn LFM OFF. This would work by pressing the Volume Down (-) and Bluetooth buttons. You would hold them in for about ten seconds. Hold until the oval ring around the buttons lights.
Also, to turn extra bass mode back on, again, press the Volume Down and Bluetooth buttons. Hold them in until the oval button ring lights up again. Then release the buttons. Finally, when the ring goes off, LFM resumes once more.
Gives the iPod Touch hard reset procedure. Now a hard reset restores all settings to…
Shows how to pair Amazon Echo to Bluetooth speakers. These include the generation 1 and…
Many speakers including this one, feature a status light that glows red while charging /…
Many speakers, including this one, feature a status light that glows red while charging /…
Here we cover the Amazon Echo Dot 3rd generation power cable specs. This is the…
The Sony SRS XB32 speaker charging indicator is a small LED light in the back…