JBL Clip 4 Charging Light

The red light glowing on the JBL Clip 4 speaker.

Describes how to read the JBL Clip 4 Charging Light LED. This gives some indication of battery status.

JBL Clip 4 Charging Light: How to Read It

This speaker has a single LED on its top panel, under the carabiner clip. This displays battery status, whether it’s draining or charging, or whether it’s critically low or not when discharging. However, it does not tell you the charging progress in terms of percentages. Nor does it say how full the battery is or how much “juice” the battery has left. But it does change color when the battery nears deadness.

1. The Charging Light is OFF

When you power down the Clip 4 with no charger supplying current to the speaker, this light goes dark. It is also OFF when the charger IS working but the battery is full.

JBL Clip 4 with a dark charging light.

2. JBL Clip 4 Charging Light Shows Battery Recharging Progress

The charging light glows red (no flashing) while the speaker charges. On this speaker, the glowing light is the only visual indication that charging is going on. But as noted earlier, it does not display how far along the charging is.

The red Charging Light light glowing.

Note also that this lamp blinks red when the battery is low. So, you should recharge it next time you can. It only flashes red when the battery is nearly dead, with no charger present. But when you connect a charger, this red flashing turns to a steady red glow. Thus, this light never flashes red while the speaker charges.

3. When the Light Goes Out While Charging, Then Charging is Complete

As speaker charging continues, the light keeps glowing red. Then charging is complete when the lamp goes out, or turns white. It turn off when the speaker is not ON, and turns white when it is ON.

The battery recharge cycle finishes when the speaker status lamp turns off. Even with the AC charger, the lamp does not glow when battery is full, unless the speaker itself is running. And in that case, it would glow or flash white.

4. The JBL Clip 4 Charging Light Is Not Much of a Charge Remaining Meter

When unplugged from the charger, what was the Charging Light becomes the battery charge left indicator. Well sort of. If it glows white, then the battery has some amount of play time left, although you cannot tell how much.

The next picture shows a JBL Clip 4, powered ON, with the battery status lamp glowing solid white. Note though that this light blinks white when the speaker has no pairing.

JBL Clip 4 speaker status lamp, glowing white.

This light gives very few battery status patterns when not charging. In fact, then only one is when the battery is nearly dead. Then, it starts flashing red.