Gives the JBL Flip 6 software update routine. This procedure can take five to ten minutes to finish. Factors such as WiFi connection speed and how fast your mobile device is can affect how long it takes.
Note though that you can’t reverse this once you install the update. That is, you won’t be able to return to any prior software version. So, be sure that you indeed want the update before proceeding.
You’ll need the following…
So, connect your mobile device to the internet and install the JBL Portable app if you haven’t already.
As a precaution, connect your speaker to household power. Why? Because we don’t want its battery going dead during the update. In fact, a dying battery could corrupt the speaker’s memory. So, this might brick it, leaving it useless and not repairable.
So, to be safe, plug the speaker into AC power. It’s best to use the included USB cable. But if you don’t have that cable, other decent cords are available that work just as well.
Finally, connect the other end of the USB-C cord into an adapter. Then plug that adapter into an AC outlet.
Then, pair your mobile device with the speaker
You are now ready to begin the software update process.
We have ours ours in a custom folder named Bluetooth Speakers on an Apple iPad Air.
The app takes a few seconds to show you some pretty animations when you first start it.
But then it finds your paired JBL Flip 6 BT speaker and shows you its status screen.
Note the presence of the Software update available link near the top of the speaker’s home page. This means that a software update is available. But if no newer software version is out, then this button does not appear.
Touching this link brings up an information page about the available software update. It describes what’s new in the latest version.
Now this screen gives details about the available update. In our case here, it suggests the Flip 6 upgrade to firmware version 0.6.4.0.
If your speaker battery has enough charge, and / or you connected the charger, then the software update process starts.
But if your battery is low and you’ve not connected the charger, the app asks you to do so now. If it does, then do that. Then follow any screen prompts to begin the update.
The update then starts. So the Portable app displays a progress screen to let you know how far along the update is.
Your mobile device downloads the new software to its memory first.
Once download to your device finishes, the app then verifies and uploads the software image to the speaker.
We’re several minutes into the update at this point in the process.
Once the app copies the upgrade file to the Flip 6, you get the Updating screen, as shown next.
At this point, the speaker is installing the new software into its primary memory. This takes roughly two minutes.
The speaker will restart automatically when it finishes updating.
Watch the Power light on the speaker. That lamp will soon go dark.
The speaker may or may not turn itself back on again. Ours did come back on by itself for this update. If yours did not, then go ahead with the next step (Step 7). But if yours did come back online though, then skip Step 7 and pick up with Step 8.
Next, press the dark Power button to turn the speaker ON again. The unit should again pair with your mobile device where you’re running the JBL Portable app. The Pairing button glows solid white.
Then meanwhile, back in the Portable App, the Update Successful appears. This happens when it gets confirmation from the speaker that the software upgrade completes.
With your speaker successfully paired to the JBL Portable app again, press the orange Let’s Party button.
The app then displays the JBL Flip 6 home screen again. But now, notice that the Software Update Available bar disappears.
So this means that the software update succeeded and that the speaker is now running the current software version.
Finally, you’ve now updated the software to the current version in your JBL Flip 6.
We've brewed several tens of pots of coffee in our Farberware automatic coffee pot. We've…
Why would you need to perform Honeywell RTH8580WF WiFi setup for this common thermostat ? …
Gives a safe routine to defrost a freezer fast with a heat gun. now a…
You can charge the JBL Clip 3 conveniently via the hidden USB charge port. Here,…
The Charge 3 JBL comes with an AC charger adapter, whose specs , type, and…
We review the Panasonic model NN-SN778 here. Now it comes packed with high power output. …