JBL Flip top view, showing the Volume DOWN and Power buttons.
We give here the JBL Flip Bluetooth speaker reset directions, to restore it to its default settings. Resetting restores the unit to default state. It also erases any earlier paired Bluetooth devices from its memory. Plus, this stops the Flip from pairing to any nearby Bluetooth devices afterwards. Also, you might reset to clear up pairing and streaming errors, or to get the speaker ready for sale or re gifting, or simply to stop it from pairing with devices you no longer wish it to pair with.
Press and hold the Power button until it lights up.
Find the Power button, as we see in the last picture above.
Then, the Power button lights up, as we see next.
In our case, since we’ve paired the speaker with Bluetooth devices since the last reset, the Flip does not enter Bluetooth discovery mode. We know that because the Power button slow blinks blue, on and off. But if in discovery mode, it would flash blue and red.
The Flip makes a couple short beeps when it boots. The unit is then ready for use after this sound ends.
See the next picture to find the Power and Volume DOWN buttons. They are on the top end of the unit. The Power button is closest to you as you face the speaker, and the Volume Down button is the left end of the button bar in the center of the speaker top.
The JBL Flip then runs its reset routine, as the next picture shows. Note that the Power button lights solid blue for a second or two during reset.
Then after a short pause, the speaker shuts off. All the lights go out. This model makes no sound upon shut down.
Next, power on the Flip again, as we detail in step 1 above. In short: Press and release the Power button.
Now this time, after reset, our speaker comes up in Bluetooth pairing / discovery mode, as we see next. Note that the Power button blinks blue and red to denote this. Moreover, when it blinks, the Flip is not currently paired. indeed, we expect it not to pair to anything after a reset.
The reset is now complete. So you may now pack it up for sale, or pair it again with your favorite Bluetooth devices.
Note that the speaker will no longer automatically connect with any previously paired Bluetooth device that is in range and in pairing more. So to restore automatic pairing, first manually pair the Flip with a device like a phone or tablet. Then, any time that both speaker and that device have Bluetooth turned on, pairing with automatically take place once more.
Shows how to pair Amazon Echo to Bluetooth speakers. These include the generation 1 and…
Many speakers including this one, feature a status light that glows red while charging /…
Many speakers, including this one, feature a status light that glows red while charging /…
Here we cover the Amazon Echo Dot 3rd generation power cable specs. This is the…
The Sony SRS XB32 speaker charging indicator is a small LED light in the back…
Here we cover the Echo Dot 3rd generation power adapter specs. This is the wall…