JBL Wonderboom 1 Connect Two Speakers

A Wonderboom 1 and a Wonderboom 2 side by side.

Explains the JBL Wonderboom 1 connect twi speakers routine, so that they both play the same audio content from one source device. In this demo, we use one JBL Wonderboom 1 1, and one JBL Wonderboom 1 2 to show how connecting two JBL Wonderboom 1s works. You can indeed mix and match.

JBL Wonderboom 1 Connect Two Speakers: Step by Step

1. Power Up Both JBL Wonderboom 1s

We show the Power buttons on each of our JBL Wonderboom 1s in the next pictures.

Press and release the Power button on the first one, and await the power-ON sound.

The JBL Wonderboom 1 top view. Showing the dark -Power- button. You must turn both speakers ON before you connect the two of them.

Then, press and release the Power button on the second JBL Wonderboom 1, and again, wait for it to come on.

The Top of the JBL Wonderboom 1 2. Showing the dark -Power- button.

2. Connect the First JBL Wonderboom 1 with a Phone or Other Bluetooth Device

In this demo, we’ll first link the JBL Wonderboom 1 1 speaker with our iPad Air tablet. Now perhaps you’re not sure how to connect your JBL Wonderboom 1 to a Bluetooth source device. If so, then see our How to Pair 1 JBL Wonderboom 1 Speaker post for details.

3. Press and Release the Play / Pause Button on the First Speaker to Continue with JBL Wonderboom 1 Connect Two Speakers

Next, press the middle (Play / Pause) area of the JBL Wonderboom 1 you just connected with your BT source device. Hold until the speaker makes a connect sound and the Bluetooth lamp starts fast-flashing. Here, our first speaker is the original JBL Wonderboom 1 (the first version of this series). And in the following picture, we show where to press.

The -Play-Pause- button.

4. Press the Play / Pause Button on the Second JBL Wonderboom 1

Next, press and release the middle area of the second JBL Wonderboom 1. Here, ours is the second version (Wonderboom 2). And in the next picture, we show where to press.

The -Play-Pause- button.

The speaker then makes a ready-to-connect sound. Also the Bluetooth light just above the center button blinks briefly. Then, once this speaker connects with the first JBL Wonderboom 1, its Bluetooth lamp glows steadily.

5. Done !

Your two JBL Wonderboom 1s now share a connection. Thus, when you play audio on your source device, you’ll now hear it through both JBL Wonderboom 1s.

A JBL Wonderboom 1 1 and JBL Wonderboom 1 2 side by side after we connect them.

Note that each JBL Wonderboom 1 provides stereo sound. Furthermore this holds true even when you have two of them joined to each other. That is, each speaker provides stereo whether or not it connects to another. Thus it’s not the case that the first JBL Wonderboom 1 plays the left channel and the second plays the right. Both JBL Wonderboom 1s play both channels, in stereo, in fact.

Ending That Connection

To break the connection between the two JBL Wonderboom 1s, simply power down the second one. After that, the first one (the one that you connected with your Bluetooth device) continues playing.

Now powering down the first one will also break the connection between it and the second speaker. Then the second one will stop playing. But this also breaks the link with the source BT device. So powering OFF the first speaker stops BOTH speakers. But the second one will still be ON until you turn it off.