JBL Xtreme portable Bluetooth speaker, right front corner view.
Change how much rumble you get on the JBL Xtreme 1, by turning on and off its Extra Bass mode. When ON, this mode makes the passive bass radiators vibrate much more. And many of you would enjoy this. It indeed adds a low rumble quality to the playing program, that travels pretty far from the speaker.
By default, the JBL Xtreme 1 has this mode ON after a reset. This adds a bit of treble and lots more bass to the audio output.
You can turn this mode off by pressing the Volume Down (-) and Bluetooth buttons. Then hold them in for about ten seconds, until the Power and Connect buttons light up white. Find all these buttons on the top of the speaker.
To turn Extra Bass mode back on, again, press the Volume Down and Bluetooth buttons in. Then hold them in until the Power and Connect buttons light white. Then release the buttons. When the buttons inside the oval above light white, the Extra Bass mode is active once again.
The drivers really thump when you switch ON extra bass mode. So use caution in how loudly you play this speaker with the resulting bass. That way, you’ll avoid damage to the speaker drivers. If the sound is crackling, tapping, or otherwise distorting, turn it down !
We've enjoyed hot instant coffee and tea for more than a score now. So these…
Why would you need to perform Honeywell RTH8580WF wireless setup for this common thermostat ? …
We've brewed several tens of pots of coffee in our Farberware automatic coffee maker. We've…
We've brewed several tens of pots of coffee in our Farberware automatic coffee pot. We've…
Why would you need to perform Honeywell RTH8580WF WiFi setup for this common thermostat ? …
Gives a safe routine to defrost a freezer fast with a heat gun. now a…