Sony Cube Speaker Bluetooth Pairing Instructions

iPadOS -Bluetooth Settings- page, showing the Sony SRS X11 speaker as Connected.

This post gives Sony Cube Speaker Bluetooth pairing instructions for this tiny personal model, with common portable devices. E.g. These include the iPhone, iPod Touch, and the iPad line of Apple phones, media players, and tablets.

Sony Cube Speaker Bluetooth Pairing Instructions, Step by Step

With your cube in the OFF state (power button is dark), run through these directions to pair it to your source BT mobile device. We use an iPad Air tablet for this demo.

1. Go to the Home Screen on your Source Device

Firstly, press the Home button to reveal the smart device’s Home screen.

2. Find the Settings App

We found ours on the second page of the Home screen, as shown next.

iOS Home Screen with Settings App Highlighted

3. Bring up the Settings App

Thirdly, touch the Settings app icon.

The smart device then shows the first page of its settings, as shown in the next step.

4. Go to the Bluetooth Settings Page to Continue with Sony Cube Speaker Bluetooth Pairing Instructions

Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is enabled here. But since our X 11 is currently shut OFF (is not in Bluetooth pairing mode), it does not display in the Bluetooth devices list. Also, we don’t see it since we’ve never paired this speaker with our mobile device before.

iPadOS -Bluetooth Settings- page showing nothing discovered

5. Turn On your Sony Cube Speaker

Turn on the cube by quickly pressing its Power button. See this, pointed at by the green arrow, in the next picture.

The -Power- button.

The unit then boots, and its status lamp glows green, as seen in the next picture.

But since our iPad does not know about this speaker, pairing to the cube will not happen automatically.

The -Status- lamp glowing.

6. Put the X`11 into Pairing Mode

Now, to see your XB11 on your device, place it into Bluetooth discovery / pairing mode. To do that, press and hold the Power-Pairing button. Release the button when the speaker makes two high beep sounds, and the status lamp starts fast flashing white. It usually takes two to three seconds to enter pairing mode. Find the Power-Pairing button as shown above.

7. Find the Speaker on your Mobile Device to Continue with Sony Cube Speaker Bluetooth Pairing Instructions

See the screen shot next. We found the test speaker, as pointed at by the yellow arrow.

iPadOS -Bluetooth Settings- page, showing the Sony Cube Speaker as -Discovered- but not -Connected-.

8. Pair with your Speaker

Tap the listed speaker in the discovered devices list.

Your mobile device then pairs with the cube.

E.g. The the mobile device’s Bluetooth Settings screen might then change to look something like the following. Note the now-connected cube entry, as pointed at by the green arrows in the next screenshot.

iPadOS -Bluetooth Settings- page, showing the Sony Cube Speaker as Connected.