We describe here the Sony X3 brick speaker reset routine to return the unit to its default settings. Furthermore, doing this erases any earlier synced Bluetooth devices from memory. We might want to clear these to prevent this speaker from pairing to any nearby BT devices. Also, you would best reset your speaker to get it ready for sale or re-gifting, or to stop it from pairing with devices you no longer wish it to connect with.
Press and release the Power button for a half-second or so. Find this button location in the next picture.
Then, the status light comes on. This light we find on the top of the speaker, just behind the Power button.
The speaker makes a startup chord sound when it powers up, whether it connects to a nearby device or not. But whether or not that, this reset routine works the same way, as follows.
Both of these buttons we find on the top of the speaker, right of center, as called out in the next picture. Both are in the back row. The Volume Down button is in the leftmost position in this row, while the Power button is in the rightmost position.
Since one of these buttons is for power, you need to first press the Volume Down button by itself, Then, after a half-second, while holding that one in, press and hold the Power button. Doing it this way prevents accidently powering down the speaker before it has a chance to reset.
Then, hold both buttons in until all lamps go out, and the speaker shuts down. This takes around five seconds as the speaker master resets.
Next, the speaker powers OFF, and the Power and Pairing lamps go dark. Note that on this speaker, there is no power-down sound when the reset finishes.
You may release the buttons when all the lights go dark.
Next, power on the X3 once more, as described in step 1 above.
Note that after a reset, this speaker comes up in pairing mode. The Pairing lamp blinks in fast white blips to tell you this. This is a signal for you to look for this speaker on a nearby BT device, and pair to it if you so desire.
The speaker reset is now complete. So you may now sell or gift the unit, or pair it again with your favorite Bluetooth devices.
After resetting, the speaker no longer automatically connects with any previously paired Bluetooth device. Thus, to restore this auto linking, you manually pair the X3 with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing would automatically take place once more.
Here, we show how to factory reset the Chromecast receiver. First, a factory reset restores…
Here, we offer our Chromecast Audio Factory Reset procedure. Doing this restores this unit to…
The Google Chromecast Audio receiver now offers basic equalizer controls (bass and treble). Moreover, you…
The Google Chromecast Audio offers basic equalizer controls (bass and treble). Moreover, you set these…
Gives the Connect Google Chromecast Audio Directions. These explain how to plug in to its…
Here, we explain How to Put Sony SRS XB22 in Pairing Mode. You need to…